Show ip redirects, Ping | Accton Technology ES3526XA, ES3552XA

4 Command Line Interface

Example

Console#show ip interface

IP address and netmask: 192.168.1.54 255.255.255.0 on VLAN 1,

and address mode:	User specified.
Console#

Related Commands

show ip redirects (4-246)

show ip redirects

This command shows the default gateway configured for this device.

Default Setting

None

Command Mode

Privileged Exec

Example

Console#show ip redirects

IP default gateway 10.1.0.254

Console#

Related Commands

ip default-gateway(4-244)

ping

This command sends ICMP echo request packets to another node on the network.

Syntax

ping host [size size] [count count]

•host - IP address or IP alias of the host.

•size - Number of bytes in a packet. (Range: 32-512, default: 32)

The actual packet size will be eight bytes larger than the size specified because the switch adds header information.

•count - Number of packets to send. (Range: 1-16, default: 5)

Default Setting

This command has no default for the host.

Command Mode

Normal Exec, Privileged Exec

Command Usage

•Use the ping command to see if another site on the network can be reached.

•Following are some results of the ping command:

4-246

Page 488

Image 488

Accton Technology ES3526XA manual Show ip redirects, Ip default-gateway4-244, Syntax Ping host size size count count

Contents

Powered by Accton Page Fast Ethernet Switch ES3526XA ES3552XA F2.2.6.3 E122006-CS-R02 149100005500H Contents Page Iii Page Command Line Interface Page Vii Viii Contents Page Contents Xii Appendix a Software Specifications Appendix B TroubleshootingGlossary Index Xiii Xiv Tables Xvi Xvii Xviii Figures Xix Figures Xxi Xxii Key Features Key FeaturesFeature Description Supports standard STP and Rapid Spanning Tree Protocol Rstp Description of Software Features Description of Software Features Introduction System Defaults System DefaultsFunction Parameter Default Password super System Defaults Function Parameter Client Enabled Clock Synchronization Disabled Introduction Connecting to the Switch Configuration Options Initial Configuration Required Connections Console Connection Basic ConfigurationRemote Connections Manual Configuration Setting PasswordsSetting an IP Address Dynamic Configuration Enabling Snmp Management Access Community Strings for Snmp version 1 and 2c clients 120 Trap Receivers118 Saving Configuration Settings Configuring Access for Snmp Version 3 Clients125 126 Managing System Files Initial Configuration Configuring the Switch Using the Web Interface Navigating the Web Browser Interface Home Configuration Options Panel Display Configuration Main MenuMain Menu Menu Description System System Information Menu Description ACL 139 Current Table143 148 Class-of-service value IP Dscp Priority 155164 Dscp Priority Status Both IP Precedence Priority Menu Description Igmp Snooping 170 Igmp Configuration Query Igmp Filter ConfigurationConfiguration Settings Igmp Filter/Throttling Trunk Configuration Settings Main Menu Displaying System Information Field Attributes Displaying Switch Hardware/Software Versions Main BoardManagement Software Expansion Slot Displaying Switch Information Bridge Extension Configuration Displaying Bridge Extension Capabilities Setting the Switch’s IP Address CLI Enter the following commandCommand Attributes 195 245 131244 Using DHCP/BOOTP 246 Command Usage Dhcp Relay and Option 82 Information 241 242 Managing Firmware Downloading System Software from a Server Operation Code Image File Transfer 11 Deleting Files Saving or Restoring Configuration Settings Downloading Configuration Settings from a Server 12 Copy Configuration Settings Console Port Settings 14 Console Port Settings Telnet Settings 15 Enabling Telnet Configuring Event Logging System Log Configuration Logging Levels Level Severity Name Description Remote Log Configuration 17 Remote Logs Displaying Log Messages CLI This example shows the event message stored in RAM Sending Simple Mail Transfer Protocol Alerts 19 Enabling and Configuring Smtp Alerts Resetting the System 20 Resetting the System Setting the System Clock Configuring Sntp Configuring NTP 22 NTP Client Configuration Setting the Time Zone Simple Network Management Protocol User defined SNMPv3 Security Models and LevelsLevel Group Read View Write View Notify View Security Setting Community Access Strings CLI The following example enables Snmp on the switchEnabling the Snmp Agent 117 25 Configuring Snmp Community Strings Specifying Trap Managers and Trap Types Configuring the Switch Configuring SNMPv3 Management Access 122 Setting a Local Engine ID Specifying a Remote Engine IDCLI This example sets an SNMPv3 engine ID 123 Configuring SNMPv3 Users CLI This example specifies a remote SNMPv3 engine ID 29 Configuring SNMPv3 Users Configuring Remote SNMPv3 Users 130 30 Configuring Remote SNMPv3 Users Configuring SNMPv3 Groups Supported Notification Messages Private Traps SwPowerStatus This trap is sent when the fan failsSwFanRecoverTrap This trap is sent when the fan failure has 31 Configuring SNMPv3 Groups 127 Setting SNMPv3 Views 32 Configuring SNMPv3 Views User Authentication Configuring User Accounts 33 Access Levels Configuring Local/Remote Logon Authentication Radius Settings Tacacs Settings 34 Authentication Settings Configuring Https Https System Support Replacing the Default Secure-site Certificate Address server ip-address Configuring the Secure Shell Configuring the Switch Generating the Host Key Pair 36 SSH Host-Key Settings Configuring the SSH Server SSH server includes basic settings for authentication Configuring Port Security 38 Configuring Port Security Configuring 802.1X Port Authentication Displaying 802.1X Global Settings 802.1X protocol provides client authenticationCLI This example shows the default global setting for Web Click Security, 802.1X, Information CLI This example enables 802.1X globally for the switch Configuring 802.1X Global SettingsConfiguring Port Settings for 41 802.1X Port Configuration Authorized Consoleconfig#interface ethernet 1/2 Displaying 802.1X Statistics 802.1X Statistics MAC Address Authentication CLI This example displays the 802.1X statistics for port Configuring the MAC Authentication Reauthentication Time Configuring MAC Authentication for Ports Web Click Security, Network Access, Configuration Displaying Secure MAC Address Information Web Click Security, Network Access, Port ConfigurationCLI This example configures MAC authentication for port 45 Network Access MAC Address Information Configuring MAC Address Filters 100 Filtering Addresses for Management Access CLI This example allows Snmp access for a specific client 47 Creating a Web IP Filter List Access Control Lists Configuring Access Control Lists 103 Setting the ACL Name and TypeCLI This example creates a standard IP ACL named david Configuring a Standard IP ACL 104 Configuring an Extended IP ACL 50 ACL Configuration Extended IP 105 Configuring a MAC ACL 111 Binding a Port to an Access Control List 52 Binding a Port to an ACL Port Configuration Displaying Connection StatusField Attributes Web 107 Basic Information ConfigurationWeb Click Port, Port Information or Trunk Information 138 Configuring Interface ConnectionsCurrent Status 54 Port/Trunk Configuration 135 Creating Trunk Groups136 Statically Configuring a Trunk 55 Configuring Port Trunks Enabling Lacp on Selected Ports 147 56 Lacp Configuration 148 Configuring Lacp Parameters Dynamically Creating a Port Channel 57 Lacp Aggregation Port Lacp Port Counters Displaying Lacp Port CountersYou can display statistics for Lacp protocol messages Protocols Ethernet Type LACPDUs Illegal Pkts Field Description Displaying Lacp Settings and Status for the Local SideLacp Internal Configuration Information 59 Lacp Port Internal Information Displaying Lacp Settings and Status for the Remote Side 10 Lacp Neighbor Configuration Information Console#show lacp 1 neighbors Setting Broadcast Storm Thresholds 61 Port Broadcast Control 140 Configuring Port Mirroring137 142 Configuring Rate LimitsRate Limit Granularity Rate Limit Configuration 145 Showing Port Statistics 144 Transmit Errors ErrorsFCS Errors Protocol Rmon Statistics 11 Port StatisticsParameter Description Or alignment error Fragments 65 Port Statistics Address Table Settings Setting Static AddressesCLI This example shows statistics for port 139 Displaying the Address Table 157 67 Dynamic Addresses 158 Spanning Tree Algorithm Configuration Changing the Aging TimeCLI This example sets the aging time to 300 seconds 159 Designated Root Port Bridge Displaying Global Settings For this Region 120 69 STA Information 176 Mstp Basic Configuration of Global Settings Configuring Global SettingsGlobal settings apply to the entire switch Root Device Configuration Configuration Settings for Rstp Configuration Settings for Mstp 70 STA Global Configuration Displaying Interface Settings AD B 71 STA Port Information Configuring Interface Settings CLI This example shows the STA attributes for port 131 Configuring Multiple Spanning Trees CLI This example sets STA attributes for port 133 73 Mstp Vlan Configuration 178 167 Displaying Interface Settings for Mstp 74 Mstp Port Information Configuring Interface Settings for Mstp 174 CLI This example sets the Mstp attributes for port175 Assigning Ports to VLANs Vlan ConfigurationIeee 802.1Q VLANs VA Vlan Aware VU Vlan Unaware Forwarding Tagged/Untagged Frames Enabling or Disabling Gvrp Global Setting CLI This example enables Gvrp for the switchDisplaying Basic Vlan Information 194 Command Attributes Web Displaying Current VLANs 78 Vlan Current Table Command Attributes CLI Creating VLANs 187 180 CLI This example creates a new Vlan179 Adding Static Members to VLANs Vlan Index Adding Static Members to VLANs Port Index 185 81 Vlan Static Membership by Port Configuring Vlan Behavior for Interfaces 82 Vlan Port Configuration Private VLANs 182183 184 Displaying Current Private VLANs 153 189 Configuring Private VLANsAssociating VLANs Displaying Private Vlan Interface Information 190 Configuring Private Vlan Interfaces 193 87 Private Vlan Port Configuration 191 Setting the Default Priority for Interfaces Class of Service ConfigurationLayer 2 Queue Settings 88 Port Priority Configuration CLI This example assigns a default priority of 5 to port 13 CoS Priority Levels Mapping CoS Values to Egress Queues12 Egress Queue Priority Mapping 201 203 Selecting the Queue Mode 90 Queue Mode 202 Setting the Service Weight for Traffic Classes200 Layer 3/4 Priority Settings Mapping Layer 3/4 Priorities to CoS ValuesSelecting IP Precedence/DSCP Priority 204 Mapping IP Precedence 14 Mapping IP Precedence Mapping Dscp Priority 15 Mapping Dscp Priority Values206 209 207 210 Mapping IP Port Priority 95 IP Port Priority Status 205 Mapping CoS Values to ACLs16 Egress Queue Priority Mapping Multicast Filtering 108 Configuring Igmp Snooping and Query Parameters Layer 2 Igmp Snooping and Query 98 Igmp Configuration Enabling Igmp Immediate Leave Displaying Interfaces Attached to a Multicast Router 100 Displaying Multicast Router Port Information 219 Specifying Static Interfaces for a Multicast Router220 Displaying Port Members of Multicast Services 215 Assigning Ports to Multicast Services 103 Igmp Member Port Table Igmp Filtering and Throttling Enabling Igmp Filtering and Throttling Configuring Igmp Filter Profiles 104 Enabling Igmp Filtering and Throttling 105 Igmp Profile Configuration Configuring Igmp Filtering and Throttling for Interfaces 106 Igmp Filter and Throttling Port Configuration General Configuration Guidelines for MVR Multicast Vlan Registration Configuring Global MVR Settings 107 MVR Global Configuration Displaying MVR Interface Status 108 MVR Port Information Displaying Port Members of Multicast Groups 109 MVR Group IP Information Configuring MVR Interface Status MVR Vlan Web Click MVR, Port or Trunk Configuration Assigning Static Multicast Groups to Interfaces Configuring Domain Name Service Configuring General DNS Service Parameters 190 234 235236 237 Configuring Static DNS Host to Address Entries 113 DNS Static Host Table 238 Displaying the DNS Cache233 Switch Clustering Cluster Configuration Cluster Member Configuration Adds Candidate switches to the cluster as Members249 250 Cluster Member Information Web Click Cluster, Member ConfigurationDisplays current cluster Member switch information Cluster Candidate Information 253 Configuring the Switch 198 Telnet Connection Using the Command Line InterfaceAccessing the CLI Command Line Interface Entering Commands Command CompletionGetting Help on Commands Keywords and Arguments Showing Commands CLIMSGPRIVILEGEEXECCMDW2SHOWMVR Negating the Effect of Commands Using Command HistoryUnderstanding Command Modes Partial Keyword Lookup Exec Commands Command Modes Configuration Commands Configuration Modes Command PromptConsoleconfig-if# 131 Spanning-tree mst-configuration Consoleconfig-mstp# 160 Keystroke Function Command Line ProcessingCommand Line Processing Command Groups Command Groups Description Command Line Interface Line Commands Line Login Related CommandsSyntax Login local no login Example Password Username 4-27 passwordSyntax Password 0 7 password no password No password is specified Syntax Exec-timeout seconds no exec-timeout Timeout login responseExec-timeout Password-thresh Silent-time4-16 Timeout login responseSyntax Password-thresh threshold no password-thresh Default value is three attempts Silent-time DatabitsSyntax Silent-time seconds no silent-time Syntax Databits 7 8 no databits Parity Syntax Parity none even odd no parity Speed StopbitsSyntax Speed bps no speed Syntax Stopbits 1 Disconnect Show lineSyntax Disconnect session-id Syntax Show line console vty General Commands EnableTo show all lines, enter this command General Commands Function Mode Disable Disable Enable passwordEnable Level Configure Show history Reload End This command exits the configuration program This example shows how to quit a CLI sessionExit Quit Prompt System Management CommandsDevice Designation Commands User Access Commands User Access Commands Function ModeHostname Syntax Hostname name no hostname Username 10 Default Login Settings Username Access-level PasswordGuest Admin Enable 4-20 authentication enable Enable passwordDefault is level Default password is super IP Filter Commands 11 IP Filter Commands Function ModeManagement Management Show management Ip http server Web Server CommandsIp http port Syntax No ip http secure-server Default Setting Ip http secure-serverIp http port 13 Https System Support Web Browser Operating System Ip http secure-port Ip http secure-port4-33 Copy tftp https-certificatePortnumber The UDP port used for HTTPS/SSL. Range Ip http secure-server4-32 Ip telnet server Telnet Server CommandsIp telnet port Secure Shell Commands 15 SSH Commands Function ModeIp telnet port Sets the SSH server key size Copy tftp public-key Command Line Interface Ip ssh crypto host-key generate 4-40 show ssh Syntax No ip ssh server Default SettingIp ssh server Ip ssh timeout Ip ssh authentication-retriesSyntax Ip ssh timeout seconds no ip ssh timeout Exec-timeout4-14 show ip ssh Syntax Delete public-key username dsa rsa Ip ssh server-key sizeDelete public-key Ip ssh crypto host-key generate Ip ssh crypto zeroizeSyntax Ip ssh crypto host-key generate dsa rsa Syntax Ip ssh crypto zeroize dsa rsa Syntax Ip ssh save host-key dsa rsa Ip ssh save host-keyShow ip ssh Terminology Show ssh16 show ssh display description Show public-key Syntax Show public-key user username hostUsername Name of an SSH user. Range 1-8 characters Shows all public keys Event Logging Commands 17 Event Logging Commands Function ModeSyntax No logging on Default Setting Logging on 18 Logging Levels Flash errors level 3 RAM warnings level 6Logging history Logging host Logging facilitySyntax No logging host hostipaddress Hostipaddress The IP address of a syslog server Logging trap Clear loggingSyntax Logging trap level no logging trap Syntax Clear logging flash ram 19 show logging flash/ram display description Show loggingSyntax Show logging flash ram sendmail trap Facility command Logging trap commandSyntax Show log flash ram login tail Show log Smtp Alert Commands 21 Smtp Alert Commands Function ModeLogging sendmail host Following example shows sample messages stored in RAM Logging sendmail level Syntax Logging sendmail level level Logging sendmail source-email Logging sendmail destination-emailSyntax No logging sendmail source-email email-address This example will set the source email john@acme.com Show logging sendmail Syntax No logging sendmail Default SettingLogging sendmail Time Commands 22 Time Commands Function ModeSyntax No sntp client Default Setting Sntp client Sntp server Sntp server 4-55 sntp poll 4-56 show sntpSyntax Sntp server ip1 ip2 ip3 Ip IP address of an NTP time server. Range 1-3 addresses Syntax Sntp poll seconds no sntp poll Sntp pollShow sntp Syntax No ntp client Default Setting Ntp clientNtp server Sntp client 4-54 ntp poll 4-58 ntp server Ntp poll Version numberNtp client 4-57 ntp poll 4-58 show ntp Syntax Ntp poll seconds no ntp poll Ntp authenticate Ntp authentication-keySyntax No ntp authenticate Default Setting Ntp authentication-key4-59 Show ntp Clock timezone This command displays the system clock Calendar setShow calendar Calendar set hour min sec day month year month day year 23 System Status Commands Function Mode System Status CommandsShow startup-config Show running-config4-65 Show running-config Show startup-config4-63 Show users This command displays system informationShow system Show version Frame Size Commands 24 Frame Size CommandsJumbo frame Enables support for jumbo frames Syntax No jumbo frame Default Setting Command Function Mode Copy Flash/File Commands25 Flash/File Commands Flash/File Commands Following example shows how to download a configuration file Syntax Dir boot-rom config opcode filename DeleteDir Delete filename Whichboot Syntax whichboot Default Setting26 File Directory Information Column Heading Description Dir 4-73 whichboot Boot systemSyntax Boot system boot-romconfig opcode filename Authentication Commands Authentication SequenceAuthentication login 27 Authentication Commands Command Group Function Authentication enable Username for setting the local user names and passwords 29 Radius Client Commands Function Mode Show radius-server Shows the current Radius settingsRadius Client Radius-server host Radius-server port Radius-server key Radius-server timeout Radius-server retransmit Show radius-server 30 Tacacs Commands Function ModeTACACS+ Client Tacacs-server host Tacacs-server portTacacs-server key Syntax Tacacs-server port portnumber no tacacs-server port Show tacacs-server Syntax Tacacs-server key keystring no tacacs-server key Port Security Commands 31 Port Security Commands Function ModeStatus Disabled Action None Maximum Addresses Interface Configuration Ethernet 802.1X Port Authentication 32 802.1X Port Authentication Command Function Mode Dot1x default Acquire a new client Dot1x timeout re-authperiodBe re-authenticated Dot1x timeout tx-period Syntax No system-auth-control Default Setting Default Command Mode Dot1x max-reqDot1x port-control Syntax Dot1x max-req count no dot1x max-req Dot1x re-authenticate Syntax Dot1x re-authenticate interfaceDot1x operation-mode Interface Dot1x re-authentication Dot1x timeout quiet-periodSyntax No dot1x re-authentication Command Mode Seconds The number of seconds. Range Show dot1x Dot1x timeout re-authperiodDot1x timeout tx-period Syntax Show dot1x statistics interface interface Statistics Displays dot1x status for each port Authenticator State Machine Reauthentication State MachineState Current state including initialize, reauthenticate Backend State Machine Example 33 Network Access Command Function Mode Network AccessNetwork-access mode Network-access max-mac-count 1024 Network-access mac-filter Syntax No network-access mac-filter filter-idmac-address Network-access port-mac-filter Network-access dynamic-vlanSyntax No network-access dynamic-vlan Default Setting Filter-id- The number that identifies the filter. Range 1800 Mac-authentication reauth-timeFollowing example enables dynamic Vlan assignment on port Clear network-access Show network-accessSyntax Show network-access interface interface Displays the settings for all interfaces Show network-access mac-filter Show network-access mac-address-tableUse this command to display MAC authentication filters Displays all filters 101 Access Control List Commands Access Control Lists Access-list ip 34 Access Control Lists Command Groups Function35 IP ACLs Command Function Mode Syntax No access-list ip standard extended aclname Standard ACL Permit, deny Ip access-group4-107 show ip access-list4-107Syntax No permit deny any source bitmask host source Access-list ip No permit deny tcp Extended ACL Show ip access-list Ip access-groupSyntax Show ip access-list standard extended aclname Syntax No ip access-group aclname Show ip access-group Map access-list ipShow ip access-list4-107 This command shows the ports assigned to IP ACLs Show map access-list ip Queue cos-map4-201 Show map access-list ipSyntax Show map access-list ip interface 36 Egress Queue Priority Mapping Example Access-list mac 37 MAC ACLs Command Function ModeSyntax No access-list mac aclname MAC ACLs Permit, deny MAC ACL Syntax No permit deny Show mac access-list Mac access-groupSyntax Show mac access-list aclname Syntax Mac access-group aclname Show mac access-group Map access-list macShow mac access-list4-112 This command shows the ports assigned to MAC ACLs Show map access-list mac Queue cos-map4-201 Show map access-list macSyntax Show map access-list mac interface 38 Egress Queue Priority Mapping Show access-list Show access-group39 ACL Information Command Function Mode ACL Information Snmp Commands 40 Snmp Commands Function Mode Show snmp Syntax No snmp-server Default SettingSnmp-server Snmp-server community Snmp-server contact Snmp-server locationSyntax Snmp-server contact string no snmp-server contact Syntax Snmp-server location text no snmp-server location Snmp-server host Host Address None Notification Type Traps Snmp Version UDP Port Issue authentication and link-up-down traps Snmp-server enable trapsSnmp-server enable traps Snmp-server engine-id Show snmp engine-id This command shows the Snmp engine IDThis example shows the default engine ID Defaultview includes access to the entire MIB tree Snmp-server viewExamples This view includes MIB-2 This command shows information on the Snmp views Show snmp viewSnmp-server group 42 show snmp view display description Show snmp group Snmp-server user 43 show snmp group display description 129 44 show snmp user display description This command shows information on Snmp usersShow snmp user Interface Commands 45 Interface Commands Function ModeInterface Port-channel channel-idRange Syntax Description string no description DescriptionSpeed-duplex Negotiation 4-133 capabilities Syntax No negotiation Default SettingNegotiation Capabilities 4-134speed-duplex4-132 Following example configures port 11 to use autonegotiationCapabilities Negotiation 4-133speed-duplex4-132 flowcontrol Syntax No flowcontrol Default SettingFlowcontrol Syntax No shutdown Default Setting Shutdown Switchport broadcast packet-rate This command clears statistics on an interfacePort-channel channel-idRange Default Setting Clear counters This command displays the status for an interface Show interfaces statusFollowing example clears statistics on port Syntax Show interfaces status interface This command displays interface statistics Show interfaces countersSyntax Show interfaces counters interface Shows the counters for all interfaces Shows all interfaces Show interfaces switchportSyntax Show interfaces switchport interface Interfaces Switchport Statistics Mirror Port Commands 47 Mirror Port Commands Function ModePort monitor Interface ethernet unit/port source port This command displays mirror information Following shows mirroring configured from port 6 to portShow port monitor Syntax Show port monitor interface Rate Limit Commands 48 Rate Limit Commands Function ModeRate-limit Fast Ethernet255 Gigabit Ethernet30 Global Configuration Ethernet, Port Channel Use this command to display the rate limit granularityRate-limit granularity Show rate-limit Link Aggregation Commands 49 Link Aggregation Commands151 138 Channel-group Guidelines for Creating TrunksGeneral Guidelines Dynamically Creating a Port Channel Following example creates trunk 1 and then adds port Syntax No lacp Default SettingLacp Lacp system-priority 32768 Lacp admin-keyEthernet Interface Lacp admin-key Port Channel Interface Configuration Port Channel Show lacp This command displays Lacp informationLacp port-priority Port Channel all 50 show lacp counters display descriptionType Badly formed PDU or an illegal value of Protocol Subtype 51 show lacp internal display description 52 show lacp neighbors display description 53 show lacp sysid display description Address Table Commands54 Address Table Commands Function Mode Mac-address-table static Mac-address- MAC addressVlan-id- Vlan ID Range Action Mac-address- MAC address Mask Bits to match in the address Clear mac-address-table dynamicShow mac-address-table Mac-address-table aging-time Show mac-address-table aging-time Spanning Tree Commands 55 Spanning Tree Commands Function Mode Spanning-tree mode Syntax No spanning-tree Default SettingSpanning tree is enabled Spanning-tree Spanning-tree forward-time Spanning-tree hello-time Spanning-tree forward-time 4-162spanning-tree max-age Spanning-tree forward-time 4-162spanning-tree hello-time Spanning-tree max-ageSpanning-tree priority Spanning-tree pathcost method Long method Spanning-tree mst-configuration This command limits the maximum transmission rate for BPDUsSpanning-tree transmission-limit Count The transmission limit in seconds. Range No mst instanceid vlan vlan-range MST ConfigurationMst vlan Mst priority NameMst instanceid priority priority no mst instanceid priority Syntax Name name Revision Max-hopsSyntax Revision number Max-hopshop-number Spanning-tree spanning-disabled Syntax No spanning-tree spanning-disabled Default SettingThis example disables the spanning tree algorithm for port Spanning-tree cost Spanning-tree port-priority Priority The priority for a port. Range 0-240, in steps Syntax No spanning-tree edge-port Default Setting Spanning-tree edge-port Syntax No spanning-tree portfast Default Setting Spanning-tree portfastSpanning-tree link-type Spanning-treeedge-port4-172 Spanning-tree mst cost Auto Spanning-tree mst port-priority Spanning-tree mst port-priority4-175 Port-channel channel-idRange Command Mode Spanning-tree protocol-migrationShow spanning-tree Syntax Spanning-tree protocol-migration interface 177 Show spanning-tree mst configuration Vlan Commands 56 VLANs Command Groups Function57 Editing Vlan Groups Command Function Mode Editing Vlan Groups By default only Vlan 1 exists and is active Vlan Database ConfigurationVlan Show vlan Configuring Vlan Interfaces 58 Configuring Vlan Interfaces Command Function ModeInterface vlan Interface vlan Switchport mode Switchport acceptable-frame-typesAll ports are in hybrid mode with the Pvid set to Vlan Switchport acceptable-frame-types4-182 Switchport ingress-filtering Syntax No switchport ingress-filtering Default Setting Switchport native vlan Switchport allowed vlan Displaying Vlan Information Switchport forbidden vlan59 Show Vlan Commands Function Mode This command shows Vlan information Following example shows how to display information for VlanShow vlan Shows all VLANs Configuring Private VLANs 60 Private Vlan Commands Vlan Configuration Private-vlan Private vlan association No private-vlan primary-vlan-idassociation Switchport mode private-vlan Switchport private-vlan host-associationNormal Vlan Secondary-vlan-id- ID of secondary VLAN. Range Switchport private-vlan isolated Isolated-vlan-id- ID of isolated VLAN. Range Syntax Show vlan private-vlan community isolated primary Switchport private-vlan mappingShow vlan private-vlan Gvrp and Bridge Extension Commands 61 Gvrp and Bridge Extension Commands Function ModeSyntax No bridge-ext gvrp Default Setting Bridge-ext gvrp Show bridge-ext Switchport gvrpSyntax No switchport gvrp Default Setting Show gvrp configuration Garp timerThis command shows if Gvrp is enabled Syntax Show gvrp configuration interface Shows all Garp timers Show garp timerSyntax Show garp timer interface Priority Commands Priority Commands Layer62 Priority Commands Command Groups Function 63 Priority Commands Layer Function Mode Syntax Queue mode strict wrr no queue mode Queue modeSwitchport priority default Queue bandwidth weight1...weight4 no queue bandwidth Queue bandwidth Queue cos-map Queue cos-mapqueueid cos1 ... cosn no queue cos-map Show queue mode This command shows the current queue modeShow queue bandwidth Show queue cos-map4-203 Syntax Show queue cos-map interface This command shows the class of service priority mapShow queue cos-map Syntax No map ip port Default Setting Priority Commands Layer 365 Priority Commands Layer 3 Function Mode Following example shows how to map Http traffic to CoS value Syntax No map ip precedence Default Setting List below shows the default priority mapping 66 Mapping IP Precedence Values CoS Value Command Mode Syntax No map ip dscp Default Setting Map ip dscp dscp-value cos cos-value no map ip dscp Use this command to show the IP port priority map Show map ip port67 IP Dscp to CoS Vales IP Dscp Value CoS Value 10, 12, 14 18, 20, 22 26, 28, 30, 32, 34 38, 40 Syntax Show map ip precedence interface This command shows the IP precedence priority mapShow map ip precedence Syntax Show map ip dscp interface This command shows the IP Dscp priority mapShow map ip dscp Multicast Filtering Commands Igmp Snooping Commands68 Multicast Filtering Commands Command Groups Function 69 Igmp Snooping Commands Function Mode Syntax No ip igmp snooping Default Setting Following example enables Igmp snoopingIp igmp snooping Ip igmp snooping vlan static Following configures the switch to use Igmp Version Ip igmp snooping versionIp igmp snooping immediate-leave Igmp Version Show ip igmp snooping Show mac-address-table multicast 215 Igmp Query Commands Layer 70 Igmp Query Commands Layer Function ModeSyntax No ip igmp snooping querier Default Setting Ip igmp snooping querier Following shows how to configure the query count to Ip igmp snooping query-intervalTimes Ip igmp snooping query-max-response-time4-218 Ip igmp snooping router-port-expire-time Seconds The report delay advertised in Igmp queries. RangeIp igmp snooping query-max-response-time Static Multicast Routing Commands 71 Static Multicast Routing Commands Function ModeIp igmp snooping vlan mrouter Syntax No ip igmp snooping vlan vlan-idmrouter interface Displays multicast router ports for all configured VLANs Show ip igmp snooping mrouterSyntax Show ip igmp snooping mrouter vlan vlan-id Multicast router port types displayed include Static Igmp Filtering and Throttling Commands 72 Igmp Filtering and Throttling Commands Function ModeSyntax No ip igmp filter Default Setting 223 Syntax Permit deny Default Setting Ip igmp profilePermit, deny Syntax No ip igmp profile profile-number Syntax No ip igmp filter profile-number RangeNo range low-ip-address high-ip-address Ip igmp max-groups Syntax Ip igmp max-groups number No ip igmp max-groups Ip igmp max-groups action Show ip igmp filterSyntax Ip igmp max-groups action replace deny Syntax Show ip igmp filter interface Show ip igmp profile Show ip igmp throttle interfaceSyntax Show ip igmp profile profile-number Syntax Show ip igmp throttle interface interface Multicast Vlan Registration Commands 73 Multicast Vlan Registration Commands Function Mode229 Multicast groups assigned to the MVR Vlan Command Line Interface Mvr Global Configuration No mvr group ip-address count vlan vlan-id Multicast Filtering Commands Mvr Interface Configuration Unit Stack unit. Range Port Port number. Range Show mvrSyntax Show mvr interface interface members ip-address Following shows the global MVR settings 74 show mvr display descriptionAre satisfied 75 show mvr interface display description 76 show mvr members display description Domain Name Service Commands77 DNS Commands Function Mode Ip host Clear hostNo ip host name address1 address2 … address8 Syntax Clear host name Ip domain-name Removes all entriesThis example clears all static entries from the DNS table Syntax Ip domain-name name no ip domain-name Ip domain-name4-234 Ip domain-listSyntax No ip domain-list name Ip name-server Ip domain-lookupServer-address1- IP address of domain-name server Ip domain-name4-234 ip domain-lookup4-236 Show hosts Ip domain-name4-234 ip name-server4-236 78 show dns cache display description Show dnsShow dns cache This command clears all entries in the DNS cache Clear dns cache Dhcp Commands 79 Dhcp Commands Function ModeSyntax No ip dhcp relay information option Default Setting Ip dhcp relay information option Ip dhcp relay information policy Ip dhcp relay serverSyntax Ip dhcp relay information policy drop keep replace Ip dhcp relay server address1 address2 address3 Show ip dhcp-relay Usage Guidelines Ip address IP Interface Commands80 IP Interface Commands Function Mode Ip default-gateway Syntax Ip default-gateway gateway no ip default-gatewayGateway IP address of the default gateway No static route is established Ip dhcp restart Show ip interface Ip default-gateway4-244 This command has no default for the hostShow ip redirects Ping 247 Switch Cluster Commands 81 Switch Cluster Commands Function ModeSyntax No cluster Default Setting Cluster Cluster commander Syntax No cluster commander Default SettingCluster ip-pool Syntax Cluster ip-pool ip-addressno cluster ip-pool Rcommand Syntax Rcommand id member-idMember-id- The ID number of the Member switch. Range Cluster member This command shows the switch clustering configuration This command shows the current switch cluster membersShow cluster Show cluster members Show cluster candidates Appendix a Software Specifications Software Features Standards Management FeaturesGroups 1, 2, 3, 9 Statistics, History, Alarm, Event Management Information Bases Software Specifications Table B-1 Troubleshooting Chart Symptom Action Using System Logs Access Control List ACL Boot Protocol BootpClass of Service CoS Differentiated Services Code Point Service Dscp Garp Vlan Registration Protocol Gvrp Generic Attribute Registration Protocol GarpGeneric Multicast Registration Protocol Gmrp Group Attribute Registration Protocol Garp Igmp Snooping Igmp QueryInternet Group Management Protocol Igmp In-Band Management Multicast Switching Port AuthenticationRemote Authentication Dial-in User Service Radius MD5 Message-Digest Algorithm Remote Monitoring Rmon Rapid Spanning Tree Protocol RstpSecure Shell SSH Simple Network Management Protocol Snmp XModem User Datagram Protocol UDPVirtual LAN Vlan Index Numerics Gateway, default 3-14,4-245 Garp Vlan Registration Protocol See Index-3 Index-4 Page ES3526XA ES3552XA E122006-CS-R02D 149100005500H

Accton Technology ES3526XA, ES3552XA manual Show ip redirects, Ping, Ip default-gateway4-244

Models: ES3526XA ES3552XA

4 Command Line Interface

Example

Related Commands

show ip redirects

None

Privileged Exec

Example

Related Commands

ip default-gateway(4-244)

ping

Syntax

ping host [size size] [count count]

This command has no default for the host.

Command Usage