Authentication Commands
4-91
4
Syntax
show dot1x [statistics] [interface interface]
•statistics - Displays dot1x status for each port.
• interface
•ethernet unit/port
-unit - This is unit 1.
-port - Port number. (Range: 1-26/52)
Command Mode
Privileged Exec
Command Usage
This command displays the following information:
•Global 802.1X Parameters – Shows whether or not 802.1X port
authentication is globally enabled on the switch.
•802.1X Port Summary – Displays the port access control parameters for
each interface, including the following items:
- Status – Administrative state for port access control.
- Operation Mode – Dot1x port control operation mode (page 4-88).
- Mode – Dot1x port control mode (page 4-87).
- Authorized – Authorization status (yes or n/a - not authorized).
•802.1X Port Details – Displays the port access control parameters f or each
interface, including the following items:
- reauth-enabled – Periodic re-authentication (page4-89).
- reauth-period – Time after which a connected client must be
re-authenticated (page 4-90).
- quiet-period – Time a port waits after Max Request Count is
exceeded before attempting to acquire a new
client (page 4-89).
- tx-period – Time a port waits during authentication session
before re-transmitting EAP packet (page 4-90).
- supplicant-timeout – Supplicant timeout.
- server-timeout – Server timeout.
- reauth-max – Maximum number of reauthentication attempts.
- max-req – Maximum number of times a port will retransmit
an EAP request/identity packet to the client
before it times out the authentication session
(page 4-87).
- Status – Authorization status (authorized or not).
- Operation Mode – Shows if single or multiple hosts (clients) can
connect to an 802.1X-authorized port.
- Max Count – The maximum number of hosts allowed to
access this port (page 4-88).