User Authentication 3

Note: MAC authentication cannot be configured on trunk ports. Ports configured as trunk members are indicated on the Network Access Port Configuration page in the “Trunk” column.

Web – Click Security, Network Access, Port Configuration.

Figure 3-44 Network Access Port Configuration

CLI – This example configures MAC authentication for port 1.

Console(config)#interface ethernet 1/1

 

Console(config-if)#network-access mode mac-authentication

4-94

Console(config-if)#network-access max-mac-count 10

4-95

Console(config-if)#network-access port-mac-filter 5

4-97

Console(config-if)#network-access dynamic-vlan

4-97

Console(config-if)#end

 

 

Console#show network-access interface ethernet 1/1

4-99

Port:1/1

 

 

--------------------------------------------------

 

--------------------------------------------------

 

MAC Authentication

:Enabled

 

Maximum MAC Count

:10

 

Dynamic VLAN Assignment

:Enabled

 

Reauthentication Time

:1800

 

Authenticated Age

:300

 

MAC Filter ID

:5

 

Console#

 

 

 

 

 

Displaying Secure MAC Address Information

Authenticated MAC addresses are stored in the secure MAC address table. Information on the secure MAC entries can be displayed and selected entries can be removed from the table.

Command Attributes

Network Access MAC Address Count – The number of MAC addresses currently in the secure MAC address table.

3-77

Page 121
Image 121
Accton Technology ES3552XA, ES3526XA manual Displaying Secure MAC Address Information