Accton Technology ES3526XA, ES3552XA manual Adding Static Members to VLANs Port Index, 185

3 Configuring the Switch

Web – Click VLAN, 802.1Q VLAN, Static Table. Select a VLAN ID from the scroll-down list. Modify the VLAN name and status if required. Select the membership type by marking the appropriate radio button in the list of ports or trunks. Click Apply.

Figure 3-80 VLAN Static Table - Adding Static Members

CLI – The following example adds tagged and untagged ports to VLAN 2.

Console(config)#interface ethernet 1/1	4-131
Console(config-if)#switchport allowed vlan add 2 tagged	4-185

Console(config-if)#exit

Console(config)#interface ethernet 1/2

Console(config-if)#switchport allowed vlan add 2 untagged

Console(config-if)#exit

Console(config)#interface ethernet 1/13

Console(config-if)#switchport allowed vlan add 2 tagged

Console(config-if)#

Adding Static Members to VLANs (Port Index)

Use the VLAN Static Membership by Port menu to assign VLAN groups to the selected interface as a tagged member.

Command Attributes

•Interface – Port or trunk identifier.

•Member – VLANs for which the selected interface is a tagged member.

•Non-Member– VLANs for which the selected interface is not a tagged member.

3-148