Accton Technology ES3552XA, ES3526XA manual Vlan Commands, Editing Vlan Groups, Vlan database

VLAN Commands 4

VLAN Commands

A VLAN is a group of ports that can be located anywhere in the network, but communicate as though they belong to the same physical segment. This section describes commands used to create VLAN groups, add port members, specify how VLAN tagging is used, and enable automatic VLAN registration for the selected interface.

Table 4-56 VLANs

Command Groups	Function	Page
Editing VLAN Groups	Sets up VLAN groups, including name, VID and state	4-179
Configuring VLAN	Configures VLAN interface parameters, including ingress and egress	4-181
Interfaces	tagging mode, ingress filtering, PVID, and GVRP
Displaying VLAN	Displays VLAN groups, status, port members, and MAC addresses	4-186
Information
Configuring Private VLANs	Configures private VLANs, including uplink and downlink ports	4-188

Editing VLAN Groups

Table 4-57 Editing VLAN Groups

Command	Function	Mode	Page
vlan database	Enters VLAN database mode to add, change, and delete	GC	4-179
	VLANs
vlan	Configures a VLAN, including VID, name and state	VC	4-180

vlan database

This command enters VLAN database mode. All commands in this mode will take effect immediately.

Default Setting

None

Command Mode

Global Configuration

Command Usage

•Use the VLAN database command mode to add, change, and delete VLANs. After finishing configuration changes, you can display the VLAN settings by entering the show vlan command.

•Use the interface vlan command mode to define the port membership mode and add or remove ports from a VLAN. The results of these commands are written to the running-configuration file, and you can display this file by entering the show running-configcommand.

4-179