System Management Commands 4

show system

This command displays system information.

Default Setting

None

Command Mode

Normal Exec, Privileged Exec

Command Usage

For a description of the items shown by this command, refer to “Displaying System Information” on page 3-10.

The POST results should all display “PASS.” If any POST test indicates “FAIL,” contact your distributor for assistance.

Example

Console#show system

System description: Layer2+ Fast Ethernet Standalone Switch ES3526XA

System OID string: 1.3.6.1.4.1.259.6.10.74

System information

 

System Up time:

0 days, 0 hours, 0 minutes, and 7.18 seconds

System Name:

[NONE]

System Location:

[NONE]

System Contact:

[NONE]

MAC address:

00-30-F1-D3-26-00

Web server:

enabled

Web server port:

80

Web secure server:

enabled

Web secure server port: 443

Telnet server

: enable

Telnet port

: 23

Jumbo Frame :

Disabled

POST result

 

Dummy Test 1.................PASS

UART LOOP BACK Test..........PASS

DRAM Test....................PASS

Timer Test...................PASS

Switch Int Loopback test.....PASS

Done All Pass.

Console#

show users

Shows all active console and Telnet sessions, including user name, idle time, and IP address of Telnet client.

Default Setting

None

Command Mode

Normal Exec, Privileged Exec

4-67

Page 309
Image 309
Accton Technology ES3552XA, ES3526XA manual Show system, Show users, This command displays system information