Accton Technology ES3552XA, ES3526XA manual Level, Normal Exec, Disable Enable password

General Commands 4

Default Setting

Level 15

Command Mode

Normal Exec

Command Usage

•“super” is the default password required to change the command mode from Normal Exec to Privileged Exec. (To set this password, see the enable password command on page 4-28.)

•The “#” character is appended to the end of the prompt to indicate that the system is in privileged access mode.

Example

Console>enable

Password: [privileged level password]

Console#

Related Commands

disable (4-21)

enable password (4-28)

disable

This command returns to Normal Exec mode from privileged mode. In normal access mode, you can only display basic information on the switch's configuration or Ethernet statistics. To gain access to all commands, you must use the privileged mode. See “Understanding Command Modes” on page 4-5.

Default Setting

None

Command Mode

Privileged Exec

Command Usage

The “>” character is appended to the end of the prompt to indicate that the system is in normal access mode.

Example

Console#disable

Console>

Related Commands

enable (4-20)

4-21