Accton Technology ES3526XA, ES3552XA manual Ip ssh timeout, Ip ssh authentication-retries

4 Command Line Interface

ip ssh timeout

This command configures the timeout for the SSH server. Use the no form to restore the default setting.

Syntax

ip ssh timeout seconds no ip ssh timeout

seconds – The timeout for client response during SSH negotiation. (Range: 1-120)

Default Setting

10 seconds

Command Mode

Global Configuration

Command Usage

The timeout specifies the interval the switch will wait for a response from the client during the SSH negotiation phase. Once an SSH session has been established, the timeout for user input is controlled by the exec-timeoutcommand for vty sessions.

Example

Console(config)#ip ssh timeout 60

Console(config)#

Related Commands

exec-timeout(4-14) show ip ssh (4-41)

ip ssh authentication-retries

This command configures the number of times the SSH server attempts to reauthenticate a user. Use the no form to restore the default setting.

Syntax

ip ssh authentication-retries count no ip ssh authentication-retries

count – The number of authentication attempts permitted after which the interface is reset. (Range: 1-5)

Default Setting

3

Command Mode

Global Configuration

4-38