Accton Technology ES3552XA Show mac access-group, Map access-list mac, Show mac access-list4-112

Access Control List Commands 4

Command Usage

•A port can only be bound to one ACL.

•If a port is already bound to an ACL and you bind it to a different ACL, the switch will replace the old binding with the new one.

Example

Console(config)#interface ethernet 1/25

Console(config-if)#mac access-group jerry in

Console(config-if)#

Related Commands

show mac access-list(4-112)

show mac access-group

This command shows the ports assigned to MAC ACLs.

Command Mode

Privileged Exec

Example

Console#show mac access-group

Interface ethernet 1/25

MAC access-list jerry in

Console#

Related Commands

mac access-group(4-112)

map access-list mac

This command sets the output queue for packets matching an ACL rule. The specified CoS value is only used to map the matching packet to an output queue; it is not written to the packet itself. Use the no form to remove the CoS mapping.

Syntax

[no] map access-list mac acl_name cos cos-value

•acl_name – Name of the ACL. (Maximum length: 16 characters)

•cos-value– CoS value. (Range: 0-7)

Default Setting

None

Command Mode

Interface Configuration (Ethernet)

4-113