Accton Technology ES3526XA, ES3552XA manual Gvrp and Bridge Extension Commands, Bridge-ext gvrp

4 Command Line Interface

Example

Console#show vlan private-vlan
Primary	Secondary	Type	Interfaces
--------	-----------	----------	------------------------------
5		primary	Eth1/ 3
5	6	community	Eth1/ 4 Eth1/ 5
0	8	isolated
Console#

GVRP and Bridge Extension Commands

GARP VLAN Registration Protocol defines a way for switches to exchange VLAN information in order to automatically register VLAN members on interfaces across the network. This section describes how to enable GVRP for individual interfaces and globally for the switch, as well as how to display default configuration settings for the Bridge Extension MIB.

Table 4-61 GVRP and Bridge Extension Commands

Command	Function	Mode	Page
bridge-ext gvrp	Enables GVRP globally for the switch	GC	4-194
show bridge-ext	Shows the global bridge extension configuration	PE	4-195
switchport gvrp	Enables GVRP for an interface	IC	4-195
switchport forbidden vlan	Configures forbidden VLANs for an interface	IC	4-186
show gvrp configuration	Displays GVRP configuration for the selected interface	NE, PE	4-196
garp timer	Sets the GARP timer for the selected function	IC	4-196
show garp timer	Shows the GARP timer for the selected function	NE, PE	4-197

bridge-ext gvrp

This command enables GVRP globally for the switch. Use the no form to disable it.

Syntax

[no] bridge-ext gvrp

Default Setting

Disabled

Command Mode

Global Configuration

Command Usage

GVRP defines a way for switches to exchange VLAN information in order to register VLAN members on ports across the network. This function should be enabled to permit automatic VLAN registration, and to support VLANs which extend beyond the local switch.

4-194