Accton Technology ES3552XA, ES3526XA manual Configuring Igmp Filter Profiles

Multicast Filtering 3

Web – Click IGMP Snooping, IGMP Filter Configuration. Create a profile number by entering the number in text box and clicking Add. Enable the IGMP filter status, then click Apply.

Figure 3-104 Enabling IGMP Filtering and Throttling

CLI – This example enables IGMP filtering and creates a profile number, then displays the current status and the existing profile numbers.

Console(config)#ip igmp filter 4-221

Console(config)#ip igmp profile 19 4-222Console(config-igmp-profile)#end Console#show ip igmp filter 4-226

IGMP filter enable Console#show ip igmp profile 4-226

IGMP Profile 19

IGMP Profile 50 Console#

Configuring IGMP Filter Profiles

When you have created an IGMP profile number, you can then configure the multicast groups to filter and set the access mode.

Command Usage

•Each profile has only one access mode; either permit or deny.

•When the access mode is set to permit, IGMP join reports are processed when a multicast group falls within the controlled range. When the access mode is set to deny, IGMP join reports are only processed when a multicast group is not in the controlled range.

3-179