Flash/File Commands
4-754
boot systemThis command specifies the image used to start up the system.
Syntax
boot system {boot-rom| config | opcode}: filename
The type of file or image to set as a default includes:
•boot-rom* - Boot ROM.
•config* - Configuration file.
•opcode* - Run-time operation code.
•filename - Name of the configuration file or code image.
* The colon (:) is required.
Default Setting
None
Command Mode
Global Configuration
Command Usage
• A colon (:) is required after the specified file type.
• If the file contains an error, it cannot be set as the default file.
Example
Related Commands
dir (4-73)
whichboot (4-74)
Console(config)#boot system config: startup
Console(config)#