Required Connections | Accton Technology ES3526XA, ES3552XA instruction

2 Initial Configuration

•Configure up to 4 static or LACP trunks

•Enable port mirroring

•Set broadcast storm control on any port

•Display system information and statistics

Required Connections

The switch provides an RS-232 serial port that enables a connection to a PC or terminal for monitoring and configuring the switch. A null-modem console cable is provided with the switch.

Attach a VT100-compatible terminal, or a PC running a terminal emulation program to the switch. You can use the console cable provided with this package, or use a null-modem cable that complies with the wiring assignments shown in the Installation Guide.

To connect a terminal to the console port, complete the following steps:

1.Connect the console cable to the serial port on a terminal, or a PC running terminal emulation software, and tighten the captive retaining screws on the DB-9 connector.

2.Connect the other end of the cable to the RS-232 serial port on the switch.

3.Make sure the terminal emulation software is set as follows:

•Select the appropriate serial port (COM port 1 or COM port 2).

•Set the baud rate to 9600 bps.

•Set the data format to 8 data bits, 1 stop bit, and no parity.

•Set flow control to none.

•Set the emulation mode to VT100.

•When using HyperTerminal, select Terminal keys, not Windows keys.

Notes: 1. When using HyperTerminal with Microsoft® Windows® 2000, make sure that you have Windows 2000 Service Pack 2 or later installed. Windows 2000 Service Pack 2 fixes the problem of arrow keys not functioning in HyperTerminal’s VT100 emulation. See www.microsoft.com for information on Windows 2000 service packs.

2.Refer to “Line Commands” on page 4-11for a complete description of console configuration options.

3.Once you have set up the terminal correctly, the console login screen will be displayed.

For a description of how to use the CLI, see “Using the Command Line Interface” on page 4-1.For a list of all the CLI commands and detailed information on using the CLI, refer to “Command Groups” on page 4-9.

2-2

Image 36

Accton Technology ES3526XA, ES3552XA manual Required Connections, Initial Configuration

Contents

Powered by Accton Page Fast Ethernet Switch ES3526XA ES3552XA F2.2.6.3 E122006-CS-R02 149100005500H Contents Page Iii Page Command Line Interface Page Vii Viii Contents Page Contents Xii Appendix a Software Specifications Appendix B TroubleshootingGlossary Index Xiii Xiv Tables Xvi Xvii Xviii Figures Xix Figures Xxi Xxii Key Features Key FeaturesFeature Description Supports standard STP and Rapid Spanning Tree Protocol Rstp Description of Software Features Description of Software Features Introduction System Defaults System DefaultsFunction Parameter Default Password super System Defaults Function Parameter Client Enabled Clock Synchronization Disabled Introduction Connecting to the Switch Configuration Options Initial Configuration Required Connections Basic Configuration Remote ConnectionsConsole Connection Setting Passwords Setting an IP AddressManual Configuration Dynamic Configuration Enabling Snmp Management Access Community Strings for Snmp version 1 and 2c clients Trap Receivers 118120 Saving Configuration Settings Configuring Access for Snmp Version 3 Clients125 126 Managing System Files Initial Configuration Configuring the Switch Using the Web Interface Navigating the Web Browser Interface Home Configuration Options Panel Display Configuration Main MenuMain Menu Menu Description System System Information Menu Description ACL 139 Current Table143 148 Class-of-service value IP Dscp Priority 155164 Dscp Priority Status Both IP Precedence Priority Menu Description Igmp Snooping 170 Igmp Configuration Query Igmp Filter ConfigurationConfiguration Settings Igmp Filter/Throttling Trunk Configuration Settings Main Menu Displaying System Information Field Attributes Displaying Switch Hardware/Software Versions Main BoardManagement Software Expansion Slot Displaying Switch Information Bridge Extension Configuration Displaying Bridge Extension Capabilities Setting the Switch’s IP Address CLI Enter the following commandCommand Attributes 195 131 244245 Using DHCP/BOOTP 246 Command Usage Dhcp Relay and Option 82 Information 241 242 Managing Firmware Downloading System Software from a Server Operation Code Image File Transfer 11 Deleting Files Saving or Restoring Configuration Settings Downloading Configuration Settings from a Server 12 Copy Configuration Settings Console Port Settings 14 Console Port Settings Telnet Settings 15 Enabling Telnet Configuring Event Logging System Log Configuration Logging Levels Level Severity Name Description Remote Log Configuration 17 Remote Logs Displaying Log Messages CLI This example shows the event message stored in RAM Sending Simple Mail Transfer Protocol Alerts 19 Enabling and Configuring Smtp Alerts Resetting the System 20 Resetting the System Setting the System Clock Configuring Sntp Configuring NTP 22 NTP Client Configuration Setting the Time Zone Simple Network Management Protocol SNMPv3 Security Models and Levels Level Group Read View Write View Notify View SecurityUser defined Setting Community Access Strings CLI The following example enables Snmp on the switchEnabling the Snmp Agent 117 25 Configuring Snmp Community Strings Specifying Trap Managers and Trap Types Configuring the Switch Configuring SNMPv3 Management Access 122 Setting a Local Engine ID Specifying a Remote Engine IDCLI This example sets an SNMPv3 engine ID 123 Configuring SNMPv3 Users CLI This example specifies a remote SNMPv3 engine ID 29 Configuring SNMPv3 Users Configuring Remote SNMPv3 Users 130 30 Configuring Remote SNMPv3 Users Configuring SNMPv3 Groups Supported Notification Messages Private Traps SwPowerStatus This trap is sent when the fan failsSwFanRecoverTrap This trap is sent when the fan failure has 31 Configuring SNMPv3 Groups 127 Setting SNMPv3 Views 32 Configuring SNMPv3 Views User Authentication Configuring User Accounts 33 Access Levels Configuring Local/Remote Logon Authentication Radius Settings Tacacs Settings 34 Authentication Settings Configuring Https Https System Support Replacing the Default Secure-site Certificate Address server ip-address Configuring the Secure Shell Configuring the Switch Generating the Host Key Pair 36 SSH Host-Key Settings Configuring the SSH Server SSH server includes basic settings for authentication Configuring Port Security 38 Configuring Port Security Configuring 802.1X Port Authentication Displaying 802.1X Global Settings 802.1X protocol provides client authenticationCLI This example shows the default global setting for Web Click Security, 802.1X, Information Configuring 802.1X Global Settings Configuring Port Settings forCLI This example enables 802.1X globally for the switch 41 802.1X Port Configuration Authorized Consoleconfig#interface ethernet 1/2 Displaying 802.1X Statistics 802.1X Statistics MAC Address Authentication CLI This example displays the 802.1X statistics for port Configuring the MAC Authentication Reauthentication Time Configuring MAC Authentication for Ports Web Click Security, Network Access, Configuration Web Click Security, Network Access, Port Configuration CLI This example configures MAC authentication for portDisplaying Secure MAC Address Information 45 Network Access MAC Address Information Configuring MAC Address Filters 100 Filtering Addresses for Management Access CLI This example allows Snmp access for a specific client 47 Creating a Web IP Filter List Access Control Lists Configuring Access Control Lists Setting the ACL Name and Type CLI This example creates a standard IP ACL named david103 Configuring a Standard IP ACL 104 Configuring an Extended IP ACL 50 ACL Configuration Extended IP 105 Configuring a MAC ACL 111 Binding a Port to an Access Control List 52 Binding a Port to an ACL Port Configuration Displaying Connection StatusField Attributes Web 107 Configuration Web Click Port, Port Information or Trunk InformationBasic Information Configuring Interface Connections Current Status138 54 Port/Trunk Configuration Creating Trunk Groups 136135 Statically Configuring a Trunk 55 Configuring Port Trunks Enabling Lacp on Selected Ports 147 56 Lacp Configuration 148 Configuring Lacp Parameters Dynamically Creating a Port Channel 57 Lacp Aggregation Port Displaying Lacp Port Counters You can display statistics for Lacp protocol messagesLacp Port Counters Protocols Ethernet Type LACPDUs Illegal Pkts Displaying Lacp Settings and Status for the Local Side Lacp Internal Configuration InformationField Description 59 Lacp Port Internal Information Displaying Lacp Settings and Status for the Remote Side 10 Lacp Neighbor Configuration Information Console#show lacp 1 neighbors Setting Broadcast Storm Thresholds 61 Port Broadcast Control Configuring Port Mirroring 137140 Configuring Rate Limits Rate Limit Granularity142 Rate Limit Configuration 145 Showing Port Statistics 144 Transmit Errors ErrorsFCS Errors Protocol 11 Port Statistics Parameter DescriptionRmon Statistics Or alignment error Fragments 65 Port Statistics Address Table Settings Setting Static AddressesCLI This example shows statistics for port 139 Displaying the Address Table 157 67 Dynamic Addresses 158 Spanning Tree Algorithm Configuration Changing the Aging TimeCLI This example sets the aging time to 300 seconds 159 Designated Root Port Bridge Displaying Global Settings For this Region 120 69 STA Information 176 Mstp Configuring Global Settings Global settings apply to the entire switchBasic Configuration of Global Settings Root Device Configuration Configuration Settings for Rstp Configuration Settings for Mstp 70 STA Global Configuration Displaying Interface Settings AD B 71 STA Port Information Configuring Interface Settings CLI This example shows the STA attributes for port 131 Configuring Multiple Spanning Trees CLI This example sets STA attributes for port 133 73 Mstp Vlan Configuration 178 167 Displaying Interface Settings for Mstp 74 Mstp Port Information Configuring Interface Settings for Mstp CLI This example sets the Mstp attributes for port 175174 Vlan Configuration Ieee 802.1Q VLANsAssigning Ports to VLANs VA Vlan Aware VU Vlan Unaware Forwarding Tagged/Untagged Frames Enabling or Disabling Gvrp Global Setting CLI This example enables Gvrp for the switchDisplaying Basic Vlan Information 194 Command Attributes Web Displaying Current VLANs 78 Vlan Current Table Command Attributes CLI Creating VLANs 187 CLI This example creates a new Vlan 179180 Adding Static Members to VLANs Vlan Index Adding Static Members to VLANs Port Index 185 81 Vlan Static Membership by Port Configuring Vlan Behavior for Interfaces 82 Vlan Port Configuration Private VLANs 182183 184 Displaying Current Private VLANs 153 Configuring Private VLANs Associating VLANs189 Displaying Private Vlan Interface Information 190 Configuring Private Vlan Interfaces 193 87 Private Vlan Port Configuration 191 Class of Service Configuration Layer 2 Queue SettingsSetting the Default Priority for Interfaces 88 Port Priority Configuration CLI This example assigns a default priority of 5 to port Mapping CoS Values to Egress Queues 12 Egress Queue Priority Mapping13 CoS Priority Levels 201 203 Selecting the Queue Mode 90 Queue Mode Setting the Service Weight for Traffic Classes 200202 Layer 3/4 Priority Settings Mapping Layer 3/4 Priorities to CoS ValuesSelecting IP Precedence/DSCP Priority 204 Mapping IP Precedence 14 Mapping IP Precedence Mapping Dscp Priority 15 Mapping Dscp Priority Values206 209 207 210 Mapping IP Port Priority 95 IP Port Priority Status Mapping CoS Values to ACLs 16 Egress Queue Priority Mapping205 Multicast Filtering 108 Configuring Igmp Snooping and Query Parameters Layer 2 Igmp Snooping and Query 98 Igmp Configuration Enabling Igmp Immediate Leave Displaying Interfaces Attached to a Multicast Router 100 Displaying Multicast Router Port Information Specifying Static Interfaces for a Multicast Router 220219 Displaying Port Members of Multicast Services 215 Assigning Ports to Multicast Services 103 Igmp Member Port Table Igmp Filtering and Throttling Enabling Igmp Filtering and Throttling Configuring Igmp Filter Profiles 104 Enabling Igmp Filtering and Throttling 105 Igmp Profile Configuration Configuring Igmp Filtering and Throttling for Interfaces 106 Igmp Filter and Throttling Port Configuration General Configuration Guidelines for MVR Multicast Vlan Registration Configuring Global MVR Settings 107 MVR Global Configuration Displaying MVR Interface Status 108 MVR Port Information Displaying Port Members of Multicast Groups 109 MVR Group IP Information Configuring MVR Interface Status MVR Vlan Web Click MVR, Port or Trunk Configuration Assigning Static Multicast Groups to Interfaces Configuring Domain Name Service Configuring General DNS Service Parameters 190 234 235236 237 Configuring Static DNS Host to Address Entries 113 DNS Static Host Table Displaying the DNS Cache 233238 Switch Clustering Cluster Configuration Cluster Member Configuration Adds Candidate switches to the cluster as Members249 250 Web Click Cluster, Member Configuration Displays current cluster Member switch informationCluster Member Information Cluster Candidate Information 253 Configuring the Switch 198 Using the Command Line Interface Accessing the CLITelnet Connection Command Line Interface Entering Commands Command CompletionGetting Help on Commands Keywords and Arguments Showing Commands CLIMSGPRIVILEGEEXECCMDW2SHOWMVR Negating the Effect of Commands Using Command HistoryUnderstanding Command Modes Partial Keyword Lookup Exec Commands Command Modes Configuration Commands Configuration Modes Command PromptConsoleconfig-if# 131 Spanning-tree mst-configuration Consoleconfig-mstp# 160 Command Line Processing Command Line ProcessingKeystroke Function Command Groups Command Groups Description Command Line Interface Line Commands Line Login Related CommandsSyntax Login local no login Example Password Username 4-27 passwordSyntax Password 0 7 password no password No password is specified Timeout login response Exec-timeoutSyntax Exec-timeout seconds no exec-timeout Password-thresh Silent-time4-16 Timeout login responseSyntax Password-thresh threshold no password-thresh Default value is three attempts Silent-time DatabitsSyntax Silent-time seconds no silent-time Syntax Databits 7 8 no databits Parity Syntax Parity none even odd no parity Speed StopbitsSyntax Speed bps no speed Syntax Stopbits 1 Disconnect Show lineSyntax Disconnect session-id Syntax Show line console vty General Commands EnableTo show all lines, enter this command General Commands Function Mode Disable Disable Enable passwordEnable Level Configure Show history Reload End This command exits the configuration program This example shows how to quit a CLI sessionExit Quit System Management Commands Device Designation CommandsPrompt User Access Commands User Access Commands Function ModeHostname Syntax Hostname name no hostname 10 Default Login Settings Username Access-level Password Guest AdminUsername Enable password Default is level Default password is superEnable 4-20 authentication enable IP Filter Commands 11 IP Filter Commands Function ModeManagement Management Show management Web Server Commands Ip http portIp http server Syntax No ip http secure-server Default Setting Ip http secure-serverIp http port 13 Https System Support Web Browser Operating System Ip http secure-port Ip http secure-port4-33 Copy tftp https-certificatePortnumber The UDP port used for HTTPS/SSL. Range Ip http secure-server4-32 Telnet Server Commands Ip telnet portIp telnet server Secure Shell Commands 15 SSH Commands Function ModeIp telnet port Sets the SSH server key size Copy tftp public-key Command Line Interface Syntax No ip ssh server Default Setting Ip ssh serverIp ssh crypto host-key generate 4-40 show ssh Ip ssh timeout Ip ssh authentication-retriesSyntax Ip ssh timeout seconds no ip ssh timeout Exec-timeout4-14 show ip ssh Ip ssh server-key size Delete public-keySyntax Delete public-key username dsa rsa Ip ssh crypto host-key generate Ip ssh crypto zeroizeSyntax Ip ssh crypto host-key generate dsa rsa Syntax Ip ssh crypto zeroize dsa rsa Ip ssh save host-key Show ip sshSyntax Ip ssh save host-key dsa rsa Show ssh 16 show ssh display descriptionTerminology Show public-key Syntax Show public-key user username hostUsername Name of an SSH user. Range 1-8 characters Shows all public keys Event Logging Commands 17 Event Logging Commands Function ModeSyntax No logging on Default Setting Logging on Flash errors level 3 RAM warnings level 6 Logging history18 Logging Levels Logging host Logging facilitySyntax No logging host hostipaddress Hostipaddress The IP address of a syslog server Logging trap Clear loggingSyntax Logging trap level no logging trap Syntax Clear logging flash ram Show logging Syntax Show logging flash ram sendmail trap19 show logging flash/ram display description Facility command Logging trap commandSyntax Show log flash ram login tail Show log Smtp Alert Commands 21 Smtp Alert Commands Function ModeLogging sendmail host Following example shows sample messages stored in RAM Logging sendmail level Syntax Logging sendmail level level Logging sendmail source-email Logging sendmail destination-emailSyntax No logging sendmail source-email email-address This example will set the source email john@acme.com Syntax No logging sendmail Default Setting Logging sendmailShow logging sendmail Time Commands 22 Time Commands Function ModeSyntax No sntp client Default Setting Sntp client Sntp server Sntp server 4-55 sntp poll 4-56 show sntpSyntax Sntp server ip1 ip2 ip3 Ip IP address of an NTP time server. Range 1-3 addresses Sntp poll Show sntpSyntax Sntp poll seconds no sntp poll Syntax No ntp client Default Setting Ntp clientNtp server Sntp client 4-54 ntp poll 4-58 ntp server Ntp poll Version numberNtp client 4-57 ntp poll 4-58 show ntp Syntax Ntp poll seconds no ntp poll Ntp authenticate Ntp authentication-keySyntax No ntp authenticate Default Setting Ntp authentication-key4-59 Show ntp Clock timezone This command displays the system clock Calendar setShow calendar Calendar set hour min sec day month year month day year System Status Commands Show startup-config23 System Status Commands Function Mode Show running-config4-65 Show running-config Show startup-config4-63 This command displays system information Show systemShow users Show version Frame Size Commands 24 Frame Size CommandsJumbo frame Enables support for jumbo frames Syntax No jumbo frame Default Setting Flash/File Commands 25 Flash/File CommandsCommand Function Mode Copy Flash/File Commands Following example shows how to download a configuration file Syntax Dir boot-rom config opcode filename DeleteDir Delete filename Whichboot Syntax whichboot Default Setting26 File Directory Information Column Heading Description Boot system Syntax Boot system boot-romconfig opcode filenameDir 4-73 whichboot Authentication Commands Authentication SequenceAuthentication login 27 Authentication Commands Command Group Function Authentication enable Username for setting the local user names and passwords 29 Radius Client Commands Function Mode Show radius-server Shows the current Radius settingsRadius Client Radius-server host Radius-server port Radius-server key Radius-server timeout Radius-server retransmit 30 Tacacs Commands Function Mode TACACS+ ClientShow radius-server Tacacs-server host Tacacs-server portTacacs-server key Syntax Tacacs-server port portnumber no tacacs-server port Show tacacs-server Syntax Tacacs-server key keystring no tacacs-server key Port Security Commands 31 Port Security Commands Function ModeStatus Disabled Action None Maximum Addresses Interface Configuration Ethernet 802.1X Port Authentication 32 802.1X Port Authentication Command Function Mode Dot1x default Acquire a new client Dot1x timeout re-authperiodBe re-authenticated Dot1x timeout tx-period Syntax No system-auth-control Default Setting Default Command Mode Dot1x max-reqDot1x port-control Syntax Dot1x max-req count no dot1x max-req Dot1x re-authenticate Syntax Dot1x re-authenticate interfaceDot1x operation-mode Interface Dot1x re-authentication Dot1x timeout quiet-periodSyntax No dot1x re-authentication Command Mode Seconds The number of seconds. Range Dot1x timeout re-authperiod Dot1x timeout tx-periodShow dot1x Syntax Show dot1x statistics interface interface Statistics Displays dot1x status for each port Authenticator State Machine Reauthentication State MachineState Current state including initialize, reauthenticate Backend State Machine Example Network Access Network-access mode33 Network Access Command Function Mode Network-access max-mac-count 1024 Network-access mac-filter Syntax No network-access mac-filter filter-idmac-address Network-access port-mac-filter Network-access dynamic-vlanSyntax No network-access dynamic-vlan Default Setting Filter-id- The number that identifies the filter. Range Mac-authentication reauth-time Following example enables dynamic Vlan assignment on port1800 Clear network-access Show network-accessSyntax Show network-access interface interface Displays the settings for all interfaces Show network-access mac-filter Show network-access mac-address-tableUse this command to display MAC authentication filters Displays all filters 101 Access Control List Commands Access Control Lists Access-list ip 34 Access Control Lists Command Groups Function35 IP ACLs Command Function Mode Syntax No access-list ip standard extended aclname Permit, deny Ip access-group4-107 show ip access-list4-107 Syntax No permit deny any source bitmask host sourceStandard ACL Access-list ip No permit deny tcp Extended ACL Show ip access-list Ip access-groupSyntax Show ip access-list standard extended aclname Syntax No ip access-group aclname Show ip access-group Map access-list ipShow ip access-list4-107 This command shows the ports assigned to IP ACLs Show map access-list ip Queue cos-map4-201 Show map access-list ipSyntax Show map access-list ip interface 36 Egress Queue Priority Mapping Example Access-list mac 37 MAC ACLs Command Function ModeSyntax No access-list mac aclname MAC ACLs Permit, deny MAC ACL Syntax No permit deny Show mac access-list Mac access-groupSyntax Show mac access-list aclname Syntax Mac access-group aclname Show mac access-group Map access-list macShow mac access-list4-112 This command shows the ports assigned to MAC ACLs Show map access-list mac Queue cos-map4-201 Show map access-list macSyntax Show map access-list mac interface 38 Egress Queue Priority Mapping Show access-list Show access-group39 ACL Information Command Function Mode ACL Information Snmp Commands 40 Snmp Commands Function Mode Syntax No snmp-server Default Setting Snmp-serverShow snmp Snmp-server community Snmp-server contact Snmp-server locationSyntax Snmp-server contact string no snmp-server contact Syntax Snmp-server location text no snmp-server location Snmp-server host Host Address None Notification Type Traps Snmp Version UDP Port Snmp-server enable traps Snmp-server enable trapsIssue authentication and link-up-down traps Snmp-server engine-id This command shows the Snmp engine ID This example shows the default engine IDShow snmp engine-id Defaultview includes access to the entire MIB tree Snmp-server viewExamples This view includes MIB-2 This command shows information on the Snmp views Show snmp viewSnmp-server group 42 show snmp view display description Show snmp group Snmp-server user 43 show snmp group display description 129 This command shows information on Snmp users Show snmp user44 show snmp user display description Interface Commands 45 Interface Commands Function ModeInterface Port-channel channel-idRange Description Speed-duplexSyntax Description string no description Syntax No negotiation Default Setting NegotiationNegotiation 4-133 capabilities Following example configures port 11 to use autonegotiation CapabilitiesCapabilities 4-134speed-duplex4-132 Syntax No flowcontrol Default Setting FlowcontrolNegotiation 4-133speed-duplex4-132 flowcontrol Syntax No shutdown Default Setting Shutdown Switchport broadcast packet-rate This command clears statistics on an interfacePort-channel channel-idRange Default Setting Clear counters This command displays the status for an interface Show interfaces statusFollowing example clears statistics on port Syntax Show interfaces status interface This command displays interface statistics Show interfaces countersSyntax Show interfaces counters interface Shows the counters for all interfaces Show interfaces switchport Syntax Show interfaces switchport interfaceShows all interfaces Interfaces Switchport Statistics Mirror Port Commands 47 Mirror Port Commands Function ModePort monitor Interface ethernet unit/port source port This command displays mirror information Following shows mirroring configured from port 6 to portShow port monitor Syntax Show port monitor interface Rate Limit Commands 48 Rate Limit Commands Function ModeRate-limit Fast Ethernet255 Gigabit Ethernet30 Global Configuration Ethernet, Port Channel Use this command to display the rate limit granularityRate-limit granularity Show rate-limit Link Aggregation Commands 49 Link Aggregation Commands151 138 Channel-group Guidelines for Creating TrunksGeneral Guidelines Dynamically Creating a Port Channel Syntax No lacp Default Setting LacpFollowing example creates trunk 1 and then adds port Lacp system-priority 32768 Lacp admin-keyEthernet Interface Lacp admin-key Port Channel Interface Configuration Port Channel This command displays Lacp information Lacp port-priorityShow lacp Port Channel all 50 show lacp counters display descriptionType Badly formed PDU or an illegal value of Protocol Subtype 51 show lacp internal display description 52 show lacp neighbors display description Address Table Commands 54 Address Table Commands Function Mode53 show lacp sysid display description Mac-address-table static Mac-address- MAC addressVlan-id- Vlan ID Range Action Clear mac-address-table dynamic Show mac-address-tableMac-address- MAC address Mask Bits to match in the address Mac-address-table aging-time Show mac-address-table aging-time Spanning Tree Commands 55 Spanning Tree Commands Function Mode Spanning-tree mode Syntax No spanning-tree Default SettingSpanning tree is enabled Spanning-tree Spanning-tree forward-time Spanning-tree hello-time Spanning-tree forward-time 4-162spanning-tree max-age Spanning-tree max-age Spanning-tree prioritySpanning-tree forward-time 4-162spanning-tree hello-time Spanning-tree pathcost method Long method Spanning-tree mst-configuration This command limits the maximum transmission rate for BPDUsSpanning-tree transmission-limit Count The transmission limit in seconds. Range MST Configuration Mst vlanNo mst instanceid vlan vlan-range Mst priority NameMst instanceid priority priority no mst instanceid priority Syntax Name name Revision Max-hopsSyntax Revision number Max-hopshop-number Spanning-tree spanning-disabled Syntax No spanning-tree spanning-disabled Default SettingThis example disables the spanning tree algorithm for port Spanning-tree cost Spanning-tree port-priority Priority The priority for a port. Range 0-240, in steps Syntax No spanning-tree edge-port Default Setting Spanning-tree edge-port Syntax No spanning-tree portfast Default Setting Spanning-tree portfastSpanning-tree link-type Spanning-treeedge-port4-172 Spanning-tree mst cost Auto Spanning-tree mst port-priority Spanning-tree mst port-priority4-175 Port-channel channel-idRange Command Mode Spanning-tree protocol-migrationShow spanning-tree Syntax Spanning-tree protocol-migration interface 177 Show spanning-tree mst configuration Vlan Commands 56 VLANs Command Groups Function57 Editing Vlan Groups Command Function Mode Editing Vlan Groups By default only Vlan 1 exists and is active Vlan Database ConfigurationVlan Show vlan Configuring Vlan Interfaces 58 Configuring Vlan Interfaces Command Function ModeInterface vlan Interface vlan Switchport mode Switchport acceptable-frame-typesAll ports are in hybrid mode with the Pvid set to Vlan Switchport acceptable-frame-types4-182 Switchport ingress-filtering Syntax No switchport ingress-filtering Default Setting Switchport native vlan Switchport allowed vlan Switchport forbidden vlan 59 Show Vlan Commands Function ModeDisplaying Vlan Information This command shows Vlan information Following example shows how to display information for VlanShow vlan Shows all VLANs Configuring Private VLANs 60 Private Vlan Commands Vlan Configuration Private-vlan Private vlan association No private-vlan primary-vlan-idassociation Switchport mode private-vlan Switchport private-vlan host-associationNormal Vlan Secondary-vlan-id- ID of secondary VLAN. Range Switchport private-vlan isolated Isolated-vlan-id- ID of isolated VLAN. Range Switchport private-vlan mapping Show vlan private-vlanSyntax Show vlan private-vlan community isolated primary Gvrp and Bridge Extension Commands 61 Gvrp and Bridge Extension Commands Function ModeSyntax No bridge-ext gvrp Default Setting Bridge-ext gvrp Switchport gvrp Syntax No switchport gvrp Default SettingShow bridge-ext Show gvrp configuration Garp timerThis command shows if Gvrp is enabled Syntax Show gvrp configuration interface Show garp timer Syntax Show garp timer interfaceShows all Garp timers Priority Commands Priority Commands Layer62 Priority Commands Command Groups Function 63 Priority Commands Layer Function Mode Queue mode Switchport priority defaultSyntax Queue mode strict wrr no queue mode Queue bandwidth weight1...weight4 no queue bandwidth Queue bandwidth Queue cos-map Queue cos-mapqueueid cos1 ... cosn no queue cos-map Show queue mode This command shows the current queue modeShow queue bandwidth Show queue cos-map4-203 This command shows the class of service priority map Show queue cos-mapSyntax Show queue cos-map interface Priority Commands Layer 3 65 Priority Commands Layer 3 Function ModeSyntax No map ip port Default Setting Following example shows how to map Http traffic to CoS value Syntax No map ip precedence Default Setting List below shows the default priority mapping 66 Mapping IP Precedence Values CoS Value Command Mode Syntax No map ip dscp Default Setting Map ip dscp dscp-value cos cos-value no map ip dscp Use this command to show the IP port priority map Show map ip port67 IP Dscp to CoS Vales IP Dscp Value CoS Value 10, 12, 14 18, 20, 22 26, 28, 30, 32, 34 38, 40 This command shows the IP precedence priority map Show map ip precedenceSyntax Show map ip precedence interface This command shows the IP Dscp priority map Show map ip dscpSyntax Show map ip dscp interface Multicast Filtering Commands Igmp Snooping Commands68 Multicast Filtering Commands Command Groups Function 69 Igmp Snooping Commands Function Mode Syntax No ip igmp snooping Default Setting Following example enables Igmp snoopingIp igmp snooping Ip igmp snooping vlan static Following configures the switch to use Igmp Version Ip igmp snooping versionIp igmp snooping immediate-leave Igmp Version Show ip igmp snooping Show mac-address-table multicast 215 Igmp Query Commands Layer 70 Igmp Query Commands Layer Function ModeSyntax No ip igmp snooping querier Default Setting Ip igmp snooping querier Following shows how to configure the query count to Ip igmp snooping query-intervalTimes Ip igmp snooping query-max-response-time4-218 Seconds The report delay advertised in Igmp queries. Range Ip igmp snooping query-max-response-timeIp igmp snooping router-port-expire-time Static Multicast Routing Commands 71 Static Multicast Routing Commands Function ModeIp igmp snooping vlan mrouter Syntax No ip igmp snooping vlan vlan-idmrouter interface Displays multicast router ports for all configured VLANs Show ip igmp snooping mrouterSyntax Show ip igmp snooping mrouter vlan vlan-id Multicast router port types displayed include Static Igmp Filtering and Throttling Commands 72 Igmp Filtering and Throttling Commands Function ModeSyntax No ip igmp filter Default Setting 223 Syntax Permit deny Default Setting Ip igmp profilePermit, deny Syntax No ip igmp profile profile-number Range No range low-ip-address high-ip-addressSyntax No ip igmp filter profile-number Ip igmp max-groups Syntax Ip igmp max-groups number No ip igmp max-groups Ip igmp max-groups action Show ip igmp filterSyntax Ip igmp max-groups action replace deny Syntax Show ip igmp filter interface Show ip igmp profile Show ip igmp throttle interfaceSyntax Show ip igmp profile profile-number Syntax Show ip igmp throttle interface interface Multicast Vlan Registration Commands 73 Multicast Vlan Registration Commands Function Mode229 Multicast groups assigned to the MVR Vlan Command Line Interface Mvr Global Configuration No mvr group ip-address count vlan vlan-id Multicast Filtering Commands Mvr Interface Configuration Show mvr Syntax Show mvr interface interface members ip-addressUnit Stack unit. Range Port Port number. Range Following shows the global MVR settings 74 show mvr display descriptionAre satisfied 75 show mvr interface display description Domain Name Service Commands 77 DNS Commands Function Mode76 show mvr members display description Ip host Clear hostNo ip host name address1 address2 … address8 Syntax Clear host name Ip domain-name Removes all entriesThis example clears all static entries from the DNS table Syntax Ip domain-name name no ip domain-name Ip domain-list Syntax No ip domain-list nameIp domain-name4-234 Ip name-server Ip domain-lookupServer-address1- IP address of domain-name server Ip domain-name4-234 ip domain-lookup4-236 Show hosts Ip domain-name4-234 ip name-server4-236 Show dns Show dns cache78 show dns cache display description This command clears all entries in the DNS cache Clear dns cache Dhcp Commands 79 Dhcp Commands Function ModeSyntax No ip dhcp relay information option Default Setting Ip dhcp relay information option Ip dhcp relay information policy Ip dhcp relay serverSyntax Ip dhcp relay information policy drop keep replace Ip dhcp relay server address1 address2 address3 Show ip dhcp-relay Usage Guidelines IP Interface Commands 80 IP Interface Commands Function ModeIp address Ip default-gateway Syntax Ip default-gateway gateway no ip default-gatewayGateway IP address of the default gateway No static route is established Ip dhcp restart Show ip interface Ip default-gateway4-244 This command has no default for the hostShow ip redirects Ping 247 Switch Cluster Commands 81 Switch Cluster Commands Function ModeSyntax No cluster Default Setting Cluster Cluster commander Syntax No cluster commander Default SettingCluster ip-pool Syntax Cluster ip-pool ip-addressno cluster ip-pool Rcommand Syntax Rcommand id member-idMember-id- The ID number of the Member switch. Range Cluster member This command shows the switch clustering configuration This command shows the current switch cluster membersShow cluster Show cluster members Show cluster candidates Appendix a Software Specifications Software Features Management Features Groups 1, 2, 3, 9 Statistics, History, Alarm, EventStandards Management Information Bases Software Specifications Table B-1 Troubleshooting Chart Symptom Action Using System Logs Access Control List ACL Boot Protocol BootpClass of Service CoS Differentiated Services Code Point Service Dscp Garp Vlan Registration Protocol Gvrp Generic Attribute Registration Protocol GarpGeneric Multicast Registration Protocol Gmrp Group Attribute Registration Protocol Garp Igmp Snooping Igmp QueryInternet Group Management Protocol Igmp In-Band Management Multicast Switching Port AuthenticationRemote Authentication Dial-in User Service Radius MD5 Message-Digest Algorithm Remote Monitoring Rmon Rapid Spanning Tree Protocol RstpSecure Shell SSH Simple Network Management Protocol Snmp User Datagram Protocol UDP Virtual LAN VlanXModem Index Numerics Gateway, default 3-14,4-245 Garp Vlan Registration Protocol See Index-3 Index-4 Page ES3526XA ES3552XA E122006-CS-R02D 149100005500H