Accton Technology ES3526XA Show snmp view, Snmp-server group, show snmp view display description

4 Command Line Interface

show snmp view

This command shows information on the SNMP views.

Command Mode

Privileged Exec

Example

Console#show snmp view

View Name: mib-2

Subtree OID: 1.2.2.3.6.2.1

View Type: included

Storage Type: permanent

Row Status: active

View Name: defaultview

Subtree OID: 1

View Type: included

Storage Type: volatile

Row Status: active

Console#

	Table 4-42 show snmp view - display description
Field		Description
View Name		Name of an SNMP view.
Subtree OID		A branch in the MIB tree.
View Type		Indicates if the view is included or excluded.
Storage Type		The storage type for this entry.
Row Status		The row status of this entry.

snmp-server group

This command adds an SNMP group, mapping SNMP users to SNMP views. Use the no form to remove an SNMP group.

Syntax

snmp-server group groupname {v1 v2c v3 {auth noauth priv}} [read readview] [write writeview] [notify notifyview]

no snmp-server group groupname

•groupname - Name of an SNMP group. (Range: 1-32 characters)

•v1 v2c v3 - Use SNMP version 1, 2c or 3.

•auth noauth priv - This group uses SNMPv3 with authentication, no authentication, or with authentication and privacy. See “Simple Network Management Protocol” on page 3-38for further information about these authentication and encryption options.

•readview - Defines the view for read access. (1-64 characters)

•writeview - Defines the view for write access. (1-64 characters)

•notifyview - Defines the view for notifications. (1-64 characters)

4-126