Accton Technology ES3526XA, ES3552XA manual Igmp Filter and Throttling Port Configuration

3 Configuring the Switch

• Trunk – Indicates if a port is a trunk member.

Web – Click IGMP Snooping, IGMP Filter/Throttling Port Configuration or IGMP Filter/Throttling Trunk Configuration. Select a profile to assign to an interface, then set the throttling number and action. Click Apply.

Figure 3-106 IGMP Filter and Throttling Port Configuration

CLI – This example assigns IGMP profile number 19 to port 1, and then sets the throttling number and action. The current IGMP filtering and throttling settings for the interface are then displayed.

Console(config)#interface ethernet 1/1 Console(config-if)#ip igmp filter 19 4-224

Console(config-if)#ip igmp max-groups 10 4-224

Console(config-if)#ip igmp max-groups action replace 4-225

Console(config-if)#end

Console#show ip igmp filter interface ethernet 1/1 4-226

Information of Eth 1/1 IGMP Profile 19

deny

range 239.1.1.1 239.1.1.1 range 239.2.3.1 239.2.3.100

Console#show ip igmp throttle interface ethernet 1/1 4-227

Information of Eth 1/1 status : FALSE action : replace

max multicast groups : 10

current multicast groups : 1 Console#

3-182