4 Command Line Interface

an associated “primary” VLAN that contains promiscuous ports. When using an isolated VLAN, it must be configured to contain a single promiscuous port.

Port membership for private VLANs is static. Once a port has been assigned to a private VLAN, it cannot be dynamically moved to another VLAN via GVRP.

Private VLAN ports cannot be set to trunked mode. (See “switchport mode” on page 4-182.)

Example

Console(config)#vlan database

Console(config-vlan)#private-vlan 2 primary

Console(config-vlan)#private-vlan 3 community

Console(config)#

private vlan association

Use this command to associate a primary VLAN with a secondary (i.e., community) VLAN. Use the no form to remove all associations for the specified primary VLAN.

Syntax

private-vlanprimary-vlan-id association {secondary-vlan-id add secondary-vlan-id remove secondary-vlan-id}

no private-vlan primary-vlan-idassociation

primary-vlan-id- ID of primary VLAN. (Range: 1-4094, no leading zeroes).

secondary-vlan-id- ID of secondary (i.e, community) VLAN. (Range: 1-4094, no leading zeroes).

Default Setting

None

Command Mode

VLAN Configuration

Command Usage

Secondary VLANs provide security for group members. The associated primary VLAN provides a common interface for access to other network resources within the primary VLAN (e.g., servers configured with promiscuous ports) and to resources outside of the primary VLAN (via promiscuous ports).

Example

Console(config-vlan)#private-vlan 2 association 3

Console(config)#

4-190

Page 432
Image 432
Accton Technology ES3526XA, ES3552XA manual Private vlan association, No private-vlan primary-vlan-idassociation