Accton Technology ES3552XA, ES3526XA manual 201, 203

Class of Service Configuration 3

Web – Click Priority, Traffic Classes. Assign priorities to the traffic classes (i.e., output queues), then click Apply.

Figure 3-89 Traffic Classes

CLI – The following example shows how to change the CoS assignments.

Console(config)#interface ethernet 1/1 4-131

Console(config-if)#queue				cos-map 0 0
4-201
Console(config-if)#queue				cos-map 1 1
Console(config-if)#queue				cos-map 2 2
Console(config-if)#end
Console#show queue		cos-map ethernet 1/1
4-203
Information of Eth		1/1
CoS Value	: 0	1 2	3	4 5 6 7
Priority Queue: 0		1 2	1	2 2 3 3
Console#

*Mapping specific values for CoS priorities is implemented as an interface configuration command, but any changes will apply to the all interfaces on the switch.

3-161