Accton Technology ES3526XA, ES3552XA manual Rate Limit Configuration, 145

3 Configuring the Switch

Web – Click Port, Rate Limit, Granularity. Select the required rate limit granularity for Fast Ethernet and Gigabit Ethernet, and click apply.

Figure 3-63 Rate Limit Granularity Configuration

CLI - This example sets and displays Fast Ethernet and Gigabit Ethernet granularity.

Console(config)#rate-limit	fastethernet granularity 512	4-145
Console(config)#rate-limit	gigabitethernet granularity 33300	4-145
console#show rate-limit		4-145
Fast ethernet granularity:	512

Gigabit ethernet granularity: 33300

Console#

Rate Limit Configuration

Use the rate limit configuration pages to apply rate limiting.

Command Usage

• Input and output rate limit can be enabled or disabled for individual interfaces.

Command Attributes

•Port/Trunk – Displays the port number.

•Rate Limit Status – Enables or disables the rate limit. (Default: Disabled)

•Rate Limit Level – Sets the rate limit level.

Note: Actual rate limit = Rate Limit Level * Granularity

3-108