Accton Technology ES3552XA Ip host, Clear host, No ip host name address1 address2 … address8

	Domain Name Service Commands			4
	Table 4-77 DNS Commands (Continued)
Command	Function	Mode	Page
show dns	Displays the configuration for DNS services	PE		4-238
show dns cache	Displays entries in the DNS cache	PE		4-238
clear dns cache	Clears all entries from the DNS cache	PE		4-239

ip host

This command creates a static entry in the DNS table that maps a host name to an IP address. Use the no form to remove an entry.

Syntax

[no] ip host name address1 [address2 … address8]

•name - Name of the host. (Range: 1-64 characters)

•address1 - Corresponding IP address.

•address2 … address8 - Additional corresponding IP addresses.

Default Setting

No static entries

Command Mode

Global Configuration

Command Usage

Servers or other network devices may support one or more connections via multiple IP addresses. If more than one IP address is associated with a host name using this command, a DNS client can try each address in succession, until it establishes a connection with the target device.

Example

This example maps two address to a host name.

Console(config)#ip host rd5 192.168.1.55 10.1.0.55

Console(config)#end

Console#show hosts

Hostname rd5

Inet address

10.1.0.55192.168.1.55

Alias Console#

clear host

This command deletes entries from the DNS table.

Syntax

clear host {name *}

•name - Name of the host. (Range: 1-64 characters)

4-233