Accton Technology ES3526XA Logging host, Logging facility, Syntax No logging host hostipaddress

4 Command Line Interface

logging host

This command adds a syslog server host IP address that will receive logging messages. Use the no form to remove a syslog server host.

Syntax

[no] logging host host_ip_address

host_ip_address - The IP address of a syslog server.

Default Setting

None

Command Mode

Global Configuration

Command Usage

•By using this command more than once you can build up a list of host IP addresses.

•The maximum number of host IP addresses allowed is five.

Example

Console(config)#logging host 10.1.0.3

Console(config)#

logging facility

This command sets the facility type for remote logging of syslog messages. Use the no form to return the type to the default.

Syntax

[no] logging facility type

type - A number that indicates the facility used by the syslog server to dispatch log messages to an appropriate service. (Range: 16-23)

Default Setting

23

Command Mode

Global Configuration

Command Usage

The command specifies the facility type tag sent in syslog messages. (See RFC 3164.) This type has no effect on the kind of messages reported by the switch. However, it may be used by the syslog server to sort messages or to store messages in the corresponding database.

Example

Console(config)#logging facility 19

Console(config)#

4-46