Basic Configuration
3-27
3
•Password Threshold – Sets the password intrusion threshold, which limits the
number of failed logon attempts. When the logon attempt threshold is reached, the
system interface becomes silent for a specified amount of time (set by the Silent
Time parameter) before allowing the next logon attempt.
(Range:0-1 20; Default: 3attempts)
•Password4 – Specifies a password for the line connection. When a connection is
started on a line with password protection, the system p rompts for the password.
If you enter the correct password, the system shows a prompt. (Default: No
password)
•Login4 – Enables password checking at login. You can select authentication by a
single global password as configured for the Password parameter, or by
passwords set up for specific user-name accounts. (Default: Local)
Web – Click System, Line, Telnet. Specify the connection parameters for Telnet
access, then click Apply.
Figure 3-15 Enabling Telnet
4. CLI only.