Accton Technology ES3552XA, ES3526XA manual Logging history, Logging Levels

System Management Commands 4

logging history

This command limits syslog messages saved to switch memory based on severity. The no form returns the logging of syslog messages to the default level.

Syntax

logging history {flash ram} level no logging history {flash ram}

•flash - Event history stored in flash memory (i.e., permanent memory).

•ram - Event history stored in temporary RAM (i.e., memory flushed on power reset).

•level - One of the levels listed below. Messages sent include the selected level down to level 0. (Range: 0-7)

		Table 4-18 Logging Levels
Level	Severity Name		Description
7	debugging		Debugging messages
6	informational		Informational messages only
5	notifications		Normal but significant condition, such as cold start
4	warnings		Warning conditions (e.g., return false, unexpected return)
3	errors		Error conditions (e.g., invalid input, default used)
2	critical		Critical conditions (e.g., memory allocation, or free
			memory error - resource exhausted)
1	alerts		Immediate action needed
0	emergencies		System unusable

* There are only Level 2, 5 and 6 error messages for the current firmware release.

Default Setting

Flash: errors (level 3 - 0)

RAM: warnings (level 6 - 0)

Command Mode

Global Configuration

Command Usage

The message level specified for flash memory must be a higher priority (i.e., numerically lower) than that specified for RAM.

Example

Console(config)#logging history ram 0

Console(config)#

4-45