
Installation Manual for DiBos Video System
Configuration (continued)
Entering control commands via the command line
Here using the command line you can specify different settings for dome cameras or matrixes that you can call up automatically again and again. For more information about which commands are possible, see the operating instructions for the camera or matrix in question. The operator can select these commands quickly in the live image if these have been released for the operator’s authorization.
6
Camera command line
|
| Click on the arrow pointing downwards in the |
|
| Camera command line option group and select |
|
| a number that has not been used if you want to |
|
| save a position or select a previously saved |
|
| position if you want to change it. |
|
| Enter the command in the command line (via the |
|
| line with the down arrow). |
|
| Note: |
|
| You can perform a command for checking by |
|
| clicking on Transmit . |
|
| The saved command is deleted via Delete . |
| Save | Click on Save, enter a logical name in the open |
|
| dialog box, and confirm it. A message appears |
|
| that the command has been saved. The name is |
|
| imported. Selecting this name causes the camera |
|
| to automatically carry out the command. |
|
|
|
Accepting entries |
|
7 OK
Click OK to confirm your entries.
Example: Matrix: CCL command LCM+ 2 1
(that is, switch Camera 2 to Monitor 1)
| – 90 – |