Bosch Appliances A5 7.8 Checking the Optional ATM Connection

Installation Manual for DiBos Video System
A5/11–2004610–4.998.137.176 – 128 –
Startup (continued)
7.8 Checking the Optional ATM Connection
The data telegram between the video system and ATM can be checked
using the ”Hyper Terminal” program in Windows XP.
Start the program via the
”Start → All Programs → Accessories → Communications → Hyper
Terminal” menus.
After startup enter a name (test name) in the dialog box and confirm
your entry.
In the next dialog box select the interface to which the interface proc-
essor is connected (input box ”Connect using”). Confirm with ”OK”.
Enter the following parameters:
– Baud: 9600
– Data bits: 8
– Parity: None
– Stop bits: 1
– Flow control: None
Confirm the entries with ”OK”.
From the ”File →menu, select Properties → Settings → ASCII–Set-
tings” and activate the ”Append line feeds to incoming line ends”
check box. Confirm with ”OK”.
Programming of the Hyper Terminal is now complete. The data can be
evaluated.
Data telegram between video system and interface processor:
1280897131808896End of transaction
1280897131808896Money withdrawal
1280897131808896Take money
1280897131808896Amount entered
1280897131808896Card recognized by ATM
1280897131808896Card in ATM
Camera number/action
Amount
Account number
Sort code
Dispenser number
Transaction number
Time
Date
Interface number (0 – 3 for ATM1 – ATM4)
Telegram Remarks
Note:
Action 1 = message ”Card in ATM”
Action 2 = message ”Take money”
Some ATMs display a message as soon as the card is inserted, but without a sort code and
account number. Other ATMs only display a message when the sort code and account
number have been read and the pin has been correctly entered.
(depending on ATM and computer
center, not always available)
820541350532037398220 
820541350532037398220 
8205413505320373982202
820541350532037398  
   1
820541350532037398220 