Installation Manual for DiBos Video System
Connections (continued)
4.4Connecting the ISDN Controller
May only be executed by authorized trained personnel!
The ISDN connection is established via a supplied adapter cable (with Western connector) to the So interface of the computer.
Note:
Only use the card type Fritz! Card PCI V2.0.
video system
ISDN controller (transmitter or receiver)
ISDN adapter | Western | Adapter | ISDN | ||||||||
card socket | connector | connecto | connectio | ||||||||
|
|
|
|
|
|
| r | n | |||
|
|
|
|
|
|
|
|
|
|
| Network |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| network |
|
| Ferrite core |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| |
|
| Supplied adapter |
| Only necessary for TAE socket |
|
|
|
| |||
|
| cable |
|
| (not supplied as standard) |
|
|
|
| ||
For installation of the ISDN card the computer must have an ISDN con- nection and the card must be installed in the computer. Use the drivers provided.
For data transfer the connection must support the EURO ISDN (DSS1) protocol. For So connections in PABXs this must be enabled first in the PABX. Also, the data service must be enabled in incoming and outgoing direction. The video system is configured for EURO ISDN as standard when supplied. For further details, see section 7.4.
ISDN socket TAE 8 to So interface of the video system
| TAE 8 Connector | Function | ||||
1 | – |
|
|
|
|
|
2 | – | SR1– | – | 4 | (b1) | Transmitter wire |
3 | – | SR2+ | – | 3 | (a1) | Transmitter wire |
4 | – | SX1– | – | 6 | (a2) | Receiver wire |
5 | – | SX2– | – | 5 | (b2) | Receiver wire |
|
|
|
|
|
|
|
ISDN socket IAE (RJ 45) to So interface of the video system
|
|
| IAE connector | Function | ||
1 | – |
|
|
|
|
|
2 | – | SR1– | – | 5 | (b1) | Transmitter wire |
3 | – | SR2+ | – | 4 | (a1) | Transmitter wire |
4 | – | SX1– | – | 3 | (a2) | Receiver wire |
5 | – | SX2– | – | 6 | (b2) | Receiver wire |
| – 28 – |
