Installation Manual for DiBos Video System
Configuration (continued)
6.2.13Configuration of cameras
(Hardware/Frame grabber/camera menu)
With this dialog box you can select which camera you would like to activate and which camera type it should be.
A maximum of 8 or 16 cameras can be connected to each MVTitan grabber card and a maximum of 4 cameras can be connected to each MVSigma grabber card. A maximum of 2 MVTitan or a maximum of 1 MVSigma can be installed.
No. | Name | Description |
|
|
|
1 | Input | Click on the corresponding camera input. The |
|
| selected line is activated. |
|
|
|
2 | Type | Click on the arrow pointing downwards in the |
|
| Type column and select the camera type. |
|
| You can choose from: PAL camera, SVHS |
|
| camera, sensor camera, or dome camera. |
|
| Information regarding the SVHS cameras: |
|
| Each SVHS camera uses 2 inputs. The layout of |
|
| the inputs can be seen in chapter 4.1. |
|
| Information concerning sensor cameras: |
|
| Each sensor camera uses one detector input in |
|
| the Frame grabber/detector menu; e.g. detector |
|
| input 2 is automatically used when the sensor |
|
| camera has been configured to input 2. This |
|
| means that when all cameras are configured as |
|
| sensor cameras, physical contact is no longer |
|
| available. |
|
|
|
3 | Name | Place the cursor in the Name column and enter |
|
| the name. Any name can be chosen. |
|
|
|
– 83 – |
