Installation Manual for DiBos Video System
Connections (continued)
4.18Connecting a Security System
4.18.1General remarks
The video system is connected to a SecSys via an RS 232 interface at COM x, e. g. by connecting an interface converter OVS in between.
video system
COM x
OVS
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| C3 | OPTO |
| ||
|
|
|
|
|
|
|
RS 232 | Interface | |||||
interface | converter | |||||
Bosch SecSys
No specific alarm modifications are necessary on the security system for connection to the video system. A suitable interface module is required. All settings are made via the video system user interface:
Data transmission must be enabled in the SecSys and the SecSys must be equipped with a suitable interface module (see Connections).
With the OVS it is possible to compensate any differences in the transmit- ter and receiver line assignments of the devices on the V.24 side of the link. To do this change the jumpers J1 and J2.
| – 48 – |
