Installation Manual for DiBos Video System
Configuration (continued)
6.2.3Configuration of hardware connections
(Hardware/connections menu)
You can
Control box is activated. Hardware is selected.
Control box is not activated. Hardware is not selected.
The settings on this hardware page should not normally be changed unless there are expansions. If changes are actually required, they can only be carried out by authorized persons or after consultation with the technical support de- partment.
No. | Name |
| Description |
|
|
|
|
|
|
1 | Framegrabber | 1 MVTitan: | The system contains one | MVTitan |
|
|
| Grabber. |
|
|
| 2 MVTitan: | The system contains two | MVTitan |
|
|
| Grabbers. |
|
|
| 1 Sigma: | The system contains one MVSigma | |
|
|
| Grabber. |
|
|
|
|
| |
2 | Video signal | PAL or NTSC |
| |
|
|
| ||
3 | IP cameras * | A maximum of 16 network cameras can be con- | ||
|
| nected. |
|
|
|
|
|
|
|
*See section 6.2.15 for additional information. Contact Bosch Security for an IP camera compatibility list.
| – 66 – |