Installation Manual for DiBos Video System
Configuration (continued)
6.2.7Configuration of barcode reader (option)
(Hardware/barcode reader menu)
You can connect a barcode reader (must be activated under Hardware/Con- nections). The barcode reader supports the output of a scanner. This input, which is supported by the video system, needs to be configured as a detector.
No | Name |
| Description |
. |
|
|
|
|
|
| |
1 | Input | Click the input of the barcode reader. The line is | |
|
| activated. | |
|
|
| |
2 | Type | Click on the arrow pointing downwards in the | |
|
| Type column and select whether the barcode | |
|
| reader should be activated or not. | |
|
| A barcode reader will be connected to the input. | |
|
| No barcode reader will be connected to the input. | |
|
| ||
|
|
| |
3 | Name | Place the cursor in the Name column and enter | |
|
| the name. Any name can be chosen. The input is | |
|
| now known to the system under this name. | |
|
|
|
|
4 | relevant places |
|
|
| from | – | Enter the position of the barcode number here |
|
|
| from where the barcode reader is to begin |
|
|
| checking (counting starts from the left). |
| Number | – | Enter the number of places to be checked. |
|
|
| |
5 | Accept | Click on Accept. If you have made incorrect in- | |
|
| puts, click on Reject and start over. | |
|
|
|
|
– 73 – |
