Installation Manual for DiBos Video System
A5/11–2004610–4.998.137.176 – 42 –
Connections (continued)
10. Make the following settings in the configuration menu:
Language: ”German”
Port: ”COM x” (interface in use)
Synchronization: ”Automatic”.
Time lag: Select ”0” (hours) and ”Daylight saving time”
License: Enter serial number and activation code
(Please note these entries are case sensitive)
Click ”Save”.
11. Click ”Yes” in the information window to start the ”Time Synchroniza-
tion” service.
Note:
A timer appears in the Windows XP task bar (at the bottom edge of
the screen). This confirms that the ”Time Synchronization” program
has started.
The color of the timer depends on the status of the receiver.
Yellow: Program starting (takes up to three minutes)
Red: No synchronization or installation error
Green: The system timer is synchronized correctly with the
receiver.
12. End the ”NeoClock Time Server” service as follows:
Select ”Control Panel → Administrative Tools→ Services”.
Select the ”NeoClock Time Server” service and click ”Close” to
exit the service.
Deactivate the service by selecting the start type ”Deactivated”
and confirm with ”OK”.
Confirm with ”OK” and close the ”Services” dialog box and the
Control Panel.
13. Reboot the PC.
14. The ”NeoClock Time Server” program must not be configured;
instead TARDIS should be used. (Program used to synchronize
video systems in a network; contact Product Service Video of the
video system manufacturer.)
15. Follow the operating instructions for NeoClock XP to position the
clock (available as a PDF file on the CD).