Installation Manual for DiBos Video System
Configuration (continued)
6.2.12Configuration of detector inputs
(Hardware/Frame grabber/Detector menu
With this dialog box you can activate and deactivate the contact inputs of the grabber card and select the stable state. A maximum of 8 or 16 contact inputs can be connected to each MVTitan grabber card and a maximum of 5 contact inputs can be connected to each MVSigma grabber card. A maximum of 2 MVTitan or a maximum of 1 MVSigma can be installed.
Note: If a sensor camera is configured, the associated detector input is used as a sensor input. The detector input is no longer available as an alarm input.
No. | Name | Description |
|
|
|
1 | Input | Click on the corresponding input. The selected |
|
| line is activated. |
|
|
|
2 | Type | Click on the arrow pointing downwards in the |
|
| Type column and select whether the input should |
|
| be configured or not. |
|
| Input is interpreted as an alarm input. |
|
| Input is not interpreted as an alarm input. |
|
|
|
3 | Name | Place the cursor in the Name column and enter |
|
| the name. Any name can be chosen. |
|
|
|
– 81 – |
