Transition Networks SISPM1040-182D user manual Sntp Commands Set, Start time End time

Transition Networks			SISPM1040-182D-LR
no event authentication-	G	Disable Authentication	switch(config)#no event
failure		failure event typ	authentication-failure
no event ring-topology-	G	Disable X-ring	switch(config)#no event ring-
change		topology changed	topology-change
		event type
no event systemlog	I	Disable port event for	switch(config)#interface
		system log	fastethernet 3
			switch(config-if)#no event
			systemlog
no event smpt	I	Disable port event for	switch(config)#interface
		SMTP	fastethernet 3
			switch(config-if)#no event smtp
show systemlog	P	Show system log	switch#show systemlog
		client & server
		information

SNTP Commands Set

Commands	Level	Description	Example
sntp enable	G	Enable SNTP function	switch(config)#sntp enable
sntp daylight	G	Enable daylight saving	switch(config)#sntp daylight
		time, if SNTP function
		is inactive, this
		command can’t be
		applied.
sntp daylight-period	G	Set period of daylight	switch(config)# sntp daylight-
[Start time] [End time]		saving time, if SNTP	period 20060101-01:01
		function is inactive,	20060202-01:01
		this command can’t be
		applied.
		Parameter format:
		[yyyymmdd-hh:mm]
Technical Support: 1-800-260-1312		International: 00-1-952-941-7600

147