Transition Networks SISPM1040-182D user manual Value, Enable Disable

Transition Networks			SISPM1040-182D-LR
bandwidth type	I	Set interface ingress	switch(config)#interface
broadcast-multicast		limit frame type to	fastEthernet 2
		“accept broadcast and	switch(config-if)#bandwidth type
		multicast frame”	broadcast-multicast
bandwidth type	I	Set interface ingress	switch(config)#interface
broadcast-only		limit frame type to	fastEthernet 2
		“only accept broadcast	switch(config-if)#bandwidth type
		frame”	broadcast-only
bandwidth in	I	Set interface input	switch(config)#interface
[Value]		bandwidth. Rate	fastEthernet 2
		Range is from 100	switch(config-if)#bandwidth in 100
		kbps to 102400 kbps
		or to 256000 kbps for
		giga ports,
		and zero means no
		limit.
bandwidth out		Set interface output	switch(config)#interface
[Value]		bandwidth. Rate	fastEthernet 2
		Range is from 100	switch(config-if)#bandwidth out
		kbps to 102400 kbps	100
		or to 256000 kbps for
		giga ports,
		and zero means no
		limit.
show bandwidth	I	Show interfaces	switch(config)#interface
		bandwidth control	fastEthernet 2
			switch(config-if)#show bandwidth
state	I	Use the state interface	switch(config)#interface
[Enable Disable]		configuration	fastEthernet 2
		command to specify	switch(config-if)#state Disable
		the state mode of
		operation for Ethernet
		ports. Use the disable
Technical Support: 1-800-260-1312		International: 00-1-952-941-7600

130