Transition Networks SISPM1040-182D user manual System configuration

Transition Networks SISPM1040-182D

6.6.1System configuration

„DHCP Server: Enable or Disable the DHCP Server function. Enable—the switch will be the DHCP server on your local network.

„Low IP Address: Type in an IP address. Low IP address is the beginning of the dynamic IP range. For example, dynamic IP is in the range between 192.168.1.100 ~ 192.168.1.200. In contrast, 192.168.1.100 is the Low IP address.

„High IP Address: Type in an IP address. High IP address is the end of the dynamic IP range. For example, dynamic IP is in the range between 192.168.1.100 ~ 192.168.1.200. In contrast, 192.168.1.200 is the High IP address.

„Subnet Mask: Type in the subnet mask of the IP configuration.

„Gateway: Type in the IP address of the gateway in your network.

„DNS: Type in the Domain Name Server IP Address in your network.

„Lease Time (sec): It is the time period that system will reset the dynamic IP assignment to ensure the dynamic IP will not remain occupied for a long time or the server doesn’t know that the dynamic IP is idle.

„ And then, click Apply .

DHCP Server Configuration interface

Technical Support: 1-800-260-1312 International: 00-1-952-941-7600