
Transition Networks |
the 2nd Ring Port to be the working port.
Enable Couple Ring: To enable the couple ring function, tick the checkbox beside the Enable Couple Ring string label.
¾Couple Port: Assign the member port which is connected to the other ring group.
¾Control Port: When the Enable Couple Ring checkbox is ticked, you have to assign the control port to form a
Enable Dual Homing: Set up one of the ports on the switch to be the Dual Homing port. For a switch, there is only one Dual Homing port. Dual Homing function works only when the
Enable Dual Ring: When this check box is ticked, the ‘Enable Ring Master’ check box will then also be enabled by the system, which means this equipment is assigned as the Ring Master. The Dual Ring differs from the Couple Ring in that it only needs a unit to form a redundant linking system of two rings.
And then, click
Apply to have the configuration take effect.
X-ring Interface
Technical Support: | International: |
103