Transition Networks SISPM1040-182D user manual Full half, 101001000auto

Transition Networks			SISPM1040-182D-LR
duplex	I	Use the duplex	switch(config)#interface
[full half]		configuration	fastEthernet 2
		command to specify	switch(config-if)#duplex full
		the duplex mode of
		operation for Fast
		Ethernet.
speed	I	Use the speed	switch(config)#interface
[101001000auto]		configuration	fastEthernet 2
		command to specify	switch(config-if)#speed 100
		the speed mode of
		operation for Fast
		Ethernet., the speed
		can’t be set to 1000 if
		the port isn’t a giga
		port..
no flowcontrol	I	Disable flow control of	switch(config-if)#no flowcontrol
		interface
security enable	I	Enable security of	switch(config)#interface
		interface	fastEthernet 2
			switch(config-if)#security enable
no security	I	Disable security of	switch(config)#interface
		interface	fastEthernet 2
			switch(config-if)#no security
bandwidth type all	I	Set interface ingress	switch(config)#interface
		limit frame type to	fastEthernet 2
		“accept all frame”	switch(config-if)#bandwidth type
			all
bandwidth type	I	Set interface ingress	switch(config)#interface
broadcast-multicast-		limit frame type to	fastEthernet 2
flooded-unicast		“accept broadcast,	switch(config-if)#bandwidth type
		multicast, and flooded	broadcast-multicast-flooded-
		unicast frame”	unicast
Technical Support: 1-800-260-1312		International: 00-1-952-941-7600

129