Transition Networks SISPM1040-182D user manual LED Indicators, Color Status Meaning, P9, P10 RJ

Transition Networks SISPM1040-182D

2.4 LED Indicators

The diagnostic LEDs that provide real-time status information are located on the front panel of the industrial switch. The following table provides the description of the LED status and their meanings.

LED	Color	Status	Meaning
PWR	Green	On	The switch unit is powered on
		Off	No power
		On	The industrial switch is the master of the
			X-Ring group
R.M.	Green
		Off	The industrial switch is not a ring master in
			the X-Ring group
PWR1	Green	On	Power 1 is active
		Off	Power 1 is inactive
PWR2	Green	On	Power 2 is active
		Off	Power 2 is inactive
FAULT	Red	On	Power or port failure
		Off	No failures
		On	A network device is detected.
	Green
		Blinking	The port is transmitting or receiving packets
P9, P10 (RJ-	(Upper LED)		from the TX device.
		Off	No device attached
45)
	Green	On	1000M
	(Lower LED)
		Off	10/100M

Technical Support: 1-800-260-1312 International: 00-1-952-941-7600