Transition Networks SISPM1040-182D user manual Ring Commands Set, Minute, Timezone

Transition Networks			SISPM1040-182D-LR
sntp daylight-offset	G	Set offset of daylight	switch(config)#sntp daylight-
[Minute]		saving time, if SNTP	offset 3
		function is inactive,
		this command can’t be
		applied.
sntp ip	G	Set SNTP server IP, if	switch(config)#sntp ip 192.169.1.1
[IP]		SNTP function is
		inactive, this
		command can’t be
		applied.
sntp timezone	G	Set timezone index,	switch(config)#sntp timezone 22
[Timezone]		use “show sntp
		timzezone” command
		to get more
		information of index
		number
show sntp	P	Show SNTP	switch#show sntp
		information
show sntp timezone	P	Show index number of	switch#show sntp timezone
		time zone list
no sntp	G	Disable SNTP function	switch(config)#no sntp
no sntp daylight	G	Disable daylight	switch(config)#no sntp daylight
		saving time

X-ring Commands Set

Commands	Level	Description	Example
ring enable	G	Enable X-ring	switch(config)#ring enable
ring master	G	Enable ring master	switch(config)#ring master
ring couplering	G	Enable couple ring	switch(config)#ring couplering
ring dualhoming	G	Enable dual homing	switch(config)#ring dualhoming
ring ringport	G	Configure 1st/2nd	switch(config)#ring ringport 7 8
Technical Support: 1-800-260-1312		International: 00-1-952-941-7600

148