Transition Networks SISPM1040-182D user manual QOS Commands Set

Transition Networks			SISPM1040-182D-LR
		interface.	switch(config-if)#stp-admin-edge
			True
stp-admin-non-stp	I	Admin NonSTP of	switch(config)#interface
[TrueFalse]		STP priority on this	fastEthernet 2
		interface.	switch(config-if)#stp-admin-non-
			stp False
show spanning-tree	E	Displays a summary of	switch>show spanning-tree
		the spanning-tree
		states.
no spanning-tree	G	Disable spanning-tree.	switch(config)#no spanning-tree

QOS Commands Set

Commands	Level	Description	Example
qos policy	G	Select QOS policy	switch(config)#qos policy
[weighted-fairstrict]		scheduling	weighted-fair
qos prioritytype	G	Setting of QOS priority	switch(config)#qos prioritytype
[port-basedcos-		type
onlytos-onlycos-
firsttos-first]
qos priority portbased	G	Configure Port-based	switch(config)#qos priority
[Port]		Priority	portbased 1 low
[lowestlowmiddlehigh]
qos priority cos	G	Configure COS	switch(config)#qos priority cos 0
[Priority][lowestlowmid		Priority	middle
dlehigh]
qos priority tos	G	Configure TOS Priority	switch(config)#qos priority tos 3
[Priority][lowestlowmid			high
dlehigh]
show qos	P	Displays the	Switch#show qos
		information of QoS
		configuration
no qos	G	Disable QoS function	switch(config)#no qos
Technical Support: 1-800-260-1312		International: 00-1-952-941-7600

137