Transition Networks SISPM1040-182D Port Mirroring Commands Set, 802.1x Commands Set, RXTXBoth

Transition NetworksSISPM1040-182D-LR

Port Mirroring Commands Set

Commands	Level	Description	Example
monitor	I	Configure source port	switch(config)#interface
[RXTXBoth]		of monitor function	fastEthernet 2
			switch(config-if)#monitor RX
monitor rx [Port ID]	G	Set RX destination	switch(config)#monitor rx 2
		port of monitor
		function
monitor tx [Port ID]	G	Set TX destination	switch(config)#monitor tx 3
		port of monitor
		function
show monitor	P	Show port monitor	switch#show monitor
		information
show monitor	I	Show port monitor	switch(config)#interface
		information	fastEthernet 2
			switch(config-if)#show monitor
no monitor	I	Disable source port of	switch(config)#interface
		monitor function	fastEthernet 2
			switch(config-if)#no monitor

802.1x Commands Set

Commands	Level	Description	Example
8021x enable	G	Use the 802.1x global	switch(config)# 8021x enable
		configuration
		command to enable
		802.1x protocols.
8021x system radiusip	G	Use the 802.1x	switch(config)# 8021x system
[IP address]		system radius IP	radiusip 192.168.1.1
		global configuration
		command to change
		the radius server IP.
8021x system serverport	G	Use the 802.1x	switch(config)# 8021x system
Technical Support: 1-800-260-1312		International: 00-1-952-941-7600

142