Listen Technologies LA-350 Turn the Unit On, LR-42/44Operating Instructions, 3B Auto-SeekEnabled

LR-42/44 Operating Instructions

3 Turn the Unit On

Turn on the unit by pressing either button on the front of the receiver.

1 2 3

1 2 3 4

ATTENTION 1: The LR-44 model must have a headset connected to the unit to turn on and remain on for longer than ten seconds.

ATTENTION 2: If using a new LA-364 NiMH battery pack the batteries may need to be put through one charge cycle before they will turn the unit on.

3A Auto-Seek Disabled (Default OFF)

The unit will power up to the same channel that it was on when it was last turned off.

3B Auto-Seek Enabled

The unit will power up to the same channel that it was on when it was last turned off. If no signal is present on that channel it will seek for a channel with signal present. If none is

IRXQGLWZLOOFRQWLQXHVHHNLQJXQWLOLWÀQGVDVLJQDO1RWHWKDWLIWKHXQLWKDVEHHQORFNHGRQ its channel this lock will override Auto-Seek

To turn the unit off press and hold the PWR button for 1.5 seconds.

LR-LALT-Design-8214042/44Guide

97