Elation Professional Spot 250 manual Fixture Menu, Default settings shaded

Design Spot 250™

9. FIXTURE MENU

On-Board System Menu: The DESIGN SPOT 250™ comes with an easy to navigate system menu. This next section will detail the functions of each command in the system menu.

LED Control Panel: The control panel located on the top, front of the fixture allows you to access the main menu and make all necessary adjustments to the Design Spot 250™. During normal operation, tapping the “MODE/ESC” key once will access the fixture’s main menu. Once in the main menu you can navigate through the different functions and access the sub-menus with the Up and Down buttons. Once you reach a field that requires adjusting, tap the ENTER button to activate that field and use the UP and Down button to adjust the field. Tapping the Enter button once more will confirm your setting. Once a setting is saved the LED will briefly readout PASS to confirm a new setting has been made and locked into memory. You may exit the main menu at any time without making any adjustments by tapping the MODE/ESC button.

MODE/ESC Button - To access the main menu locate the MODE/ESC button on the front of the unit. Press this button to activate the system menu. Tap the UP button until you reach the function you wish to change. When you reach the function you wish to change tap the ENTER button once to select that menu function. When a function is selected the menu will begin to flash, use the UP or DOWN button to change the function. Once your changes are made tap the ENTER button yet again to lock the change in the system menu. To exit without making any changes tap the MODE/ESC button.

Default settings shaded.

						Indicate the staring DMX address
1	ADDR	AXXX	A001
						A001 also is the setting for slave
2	TEST	T-01~T-XX				Automatically test the function
		RUN		MSTR/ALON		Runs the fixture as a “master” unit or in
						“stand-alone” in auto mode
		AUDI		MSTR/ALON		Runs the fixture as a “master” unit or in
3	PLAY					“stand-alone” in audio mode
						Runs fixture in “AUTO” when running to
		AUTO		OFF/ RUN /	AUDI	the user installed programs (see page
						“Edit Menu on page 36)

©Elation Professional® 21 Design Spot 250™