Design Spot 250™
5. LAMP INSTALLATION INSTRUCTIONS
Installing or replacing the lamp
with the device unplugged from the mains.
be replaced when it is damaged or deformed.
Before replacing the lamp be sure the unit has ample time to cool, to avoid injury to yourself never touch the lamp when it is hot.
During the installation of discharge lamps do not touch the glass portion of the bulb bare handed. Always use a cloth to handle the lamps during insertion and removal.
Do not install lamps with a higher wattage than that specified by the manufacture, they generate higher temperatures than which the device is designed to cool and may explode.
Installation Procedure:
1.Lay the fixture on its’ back and remove the two Phillips screws labeled “A” and “B” found on the bottom plate of the fixture.
©Elation Professional® | 10 | Design Spot 250™ |
