Elation Professional Spot 250 manual Laau

Design Spot 250™

7. Press MODE/ESC to return to the main menu.

FLIP – This function will reverse the display readout buy 180˚.

1.Access the main menu.

2.Tap the UP button until “DISP” is displayed.

3.Press ENTER, the display will show “VALU”.

4.Tap the UP button until ”FLIP” is displayed and tap the ENTER button.

5.Press the UP button to select “ON” to activate this function, or “OFF” to deactivate this function.

6.Press ENTER to confirm.

7.Press MODE/ESC to return to the main menu.

13.SPEC MENU – This menu option access all the special functions listed below.

LAAU - Automatic lamp start with power.

RDMX - Allows DMX address to be changed via and external DMX controller. DLOF - Switch lamp off via DMX controller.

DLAY - Lamp-on delay time.

SPOT - This provides a spot beam for better lamp optimization. DFSE (Default) - Resets the unit to all default settings.

FEED - This function turn the DMX correction feature “ON” (default) or “OFF.” FANS- Changes the functionality of the built-in fans.

VER (Version) - Displays the software version. ADJU – Calibration functions

LAAU

– This function controls the automatic lamp start feature. By default the unit will automatically ignite the lamp when unit is turned on. Use this function to turn this feature on and off.

1.Access the main menu.

2.Tap the UP button until “SPEC” is displayed, press ENTER.

3.Tap the UP button until “LAAU” is displayed, press ENTER.

4.The display will show “ON/OFF.”

©Elation Professional® 31 Design Spot 250™