Elation Professional Spot 250 manual Reset function, Dlof, Dlay

Design Spot 250™

reset function.

DLOF

– This feature allow you to control the lamp via DMX.

1.Access the main menu.

2.Tap the UP button until “SPEC” is displayed, press ENTER.

3.Tap the UP button until “DLOF” is displayed, press ENTER.

4.The display will show “ON/OFF.”

5.Press the UP button to display “ON” to activate this function, or “OFF” to deactivate this function.

6.Press ENTER to confirm.

7.Press MODE/ESC to return to the main menu.

DLAY

– This function allows the user to set a lamp “strike” delay time.

1.Access the main menu.

2.Tap the UP button until “SPEC” is displayed, press ENTER.

3.Tap the UP button until “DLAY” is displayed, press ENTER.

4.The display will show “D-XX.”

5.Press the UP and DOWN buttons to adjust the delay time.

6.When completed press ENTER to confirm.

7.Press MODE/ESC to return to the main menu.

SPOT

– This function allows you to optimize the lamp without the use of an external DMX controller. In this mode, the device will not react to any control signal.

1.Access the main menu.

2.Tap the UP button until “SPEC” is displayed, press ENTER.

3.Tap the UP button until “DFSE” is displayed, press ENTER.

4.The display will show “ON/OFF.”

5.Press the UP button to display “ON” to activate this function, or “OFF” to deactivate this function.

©Elation Professional® 33 Design Spot 250™