Controlling other equipment | 08 |
Chapter 8
Controlling other equipment
Using the remote control with other components
The supplied remote control can operate not only this receiver, but also your TV, DVD player and other components. If the component is listed in the remote control's memory, simply follow the steps in Recalling preset codes below. If the component is not listed, or if you want the remote to learn additional operations, see Programming signals from other remote controls on page 69.
Note
•The remote control operations in this section are accessed from the remote setup menu. To go to the
remote setup menu, press | SETUP from the remote |
control Home menu (
):
Recalling preset codes
The following steps show you how to recall preset codes for each input source. Use the remote control touch screen to do this.
1Make sure the component you want to control is switched on.
2Press PRESET RECALL on the remote setup menu.
SETUP 1/3
CALIBRATE
PRESET RECALL
LEARNING
MULTI OPERATION
DIRECT FUNCTION
HOME 1/3
RECEIVER 
RECEIVER
INPUT 1 | 2 | 3 | |
DVR |
| TV | SAT |
/ LD |
| / DVD | |
|
| ||
DVR |
| CD | TUNER |
/ VCR1 |
| ||
|
|
| |
TV |
| MULTI | SYSTEM |
CONT | OPERATION | OFF | |
SETUP
SETUP 1/3
CALIBRATE
PRESET RECALL
LEARNING
MULTI OPERATION
DIRECT FUNCTION
3From the ‘Select Function’ screen, choose the input function which matches the connection for the component you want to control.
For example, press DVD/LD if you want to control the DVD player that you connected to the DVD/LD terminals.
Select Function |
PRESET RECALL |
DVD/LD |
•For more on navigating the remote control menu screens, see Basic remote control displays on page 33. See also TV control menu screens on page 36 and Operating menus for additional components on page 37.
•When using a TV, it is often best to use the TV/DVD input for the TV source, and TV CONT for the TV screen or monitor.
| TV/DVD |
| SAT |
| CANCEL |
• Use the | (cursor up/down) buttons to scroll |
through the component options.
•You can select any button, but choosing a button that’s already assigned will overwrite the old preset (and any other operations you may have programmed).
67
En
