JVC GR-D200 manual Resetting The File Name, Setting Print Information Dpof

							EN￿ '
	Resetting The File Name			Setting Print Information (DPOF
				Setting)
By resetting the file name, a new folder will be
made. The new files you are going to make will be
		This camcorder is compatible with the DPOF
stored in the new folder. It is convenient to separate
the new files from previously made files. (Available		(Digital Print Order Format) standard in order to
only for Image and video clip files.)		support future systems such as automatic printing.
1 Load a memory card. ( pg. 16)		You can select one of the 2 print information settings
		for images stored in the memory card: “To Print All
2 Set the VIDEO/MEMORY Switch to “MEMORY”.
		Still Images (One Print For Each)” or “To Print By
3 Set the Power Switch to “PLAY” while pressing		Selecting Still Images And Number Of Prints”.
	down the Lock Button located on the switch.	NOTES:
4 Open the LCD monitor fully, or pull out the
		● If you load a memory card already set as shown
	viewfinder fully.		below in a printer compatible with DPOF, it will
	● The type of file (IMAGE or E-MAIL CLIP) which		make prints of the selected still images
	has been played back at the last time is		automatically.
	displayed.	● To print images recorded on a tape, first dub them
5 Press SELECT/SET. The MEMORY SELECT screen			to a memory card. ( pg. 55)
	appears.	To Print All Still Images (One Print For Each)
6 Press + or – to select the desired type of file
	(IMAGE or E-MAIL CLIP), and press SELECT/SET.
		1 Load a memory card. ( pg. 16)
	The image or video clip playback screen (IMAGE
	or E-MAIL CLIP) appears.	2 Set the VIDEO/MEMORY Switch to “MEMORY”.
7 Press MENU. The Menu Screen appears.		3 Set the Power Switch to “PLAY” while pressing
8 Press + or – to select “NO. RESET”, and press				down the Lock Button located on the switch.
	SELECT/SET. The NO. RESET screen appears.	4 Open the LCD monitor fully, or pull out the
9 Press + or – to select “EXECUTE”, and press				viewfinder fully.
	SELECT/SET. The new folder (such as			● The type of file (IMAGE or E-MAIL CLIP) which
	“101JVCGR”) will be made and the file made of			has been played back at the last time is
	the next shot starts from DVC00001.			displayed.
Folder and File names		5 If the video clip playback (E-MAIL CLIP,
Each time shooting takes place, a file name is made				 pg. 25) screen appears, press SELECT/SET.
				The MEMORY SELECT screen appears.
using a number which is larger by one than the
		6 Press + or – to select “IMAGE”, and press
largest number of the file names which are in use.
Even if you delete an image or video clip file with a				SELECT/SET. The image playback screen
number in the middle of range, the number will not				(IMAGE) appears.
be used for a new shot; a gap will remain in the		7 Press MENU. The Menu Screen appears.
numerical sequence. If the file name reaches		8 Press + or – to select
DVC09999, a new folder (such as “101JVCGR”) will
				“DPOF”, and press		MENU
be made and the file name will start again from
				SELECT/SET. The Sub	DPOF		CURRENT
DVC00001.
				Menu appears.			ALL 1
							RESET
		9 Press + or – to select					RETURN
				“ALL 1”, and press
				SELECT/SET. The DPOF
				screen appears.
		10 Press + or – to select				DPOF
				“EXECUTE”, and press
				SELECT/SET. The normal
				playback screen appears.		ALL 1 ?
				● To cancel selection,
						EXECUTE
				select “RETURN”.		RETURN

RECORDING & PLAYBACK

DIGITAL STILL CAMERA (D.S.C.)

CONTINUED ON NEXT PAGE