JVC GR-D200 manual Date/Time Settings, Menu Button, Select/Set

W I PE / FADER OF F

FADER–WH I TE

FADER–B LACK

FADER–B .W

WI PE –CORNER

WI PE –W I NDOW

WI PE – SL I DE

WI PE –DOOR

WI PE – SCROLL

WI PE – SHUTTER

CAMERA DISPLAY

ON SCREEN – LCD / T V DATE / T I ME – AUTO T I ME CODE – OFF

CLOCK DEC 2 5'0 3

ADJ .5 : 3 0 PM

￿"￿EN

Date/Time Settings

The date/time is recorded onto the tape at all times, but its display can be turned on or off during playback. ( pg. 31, 41)

Lock Button

Power Switch

SELECT/SET

Button

+/- Button

MENU Button

1Set the Power Switch to “M” while pressing down the Lock Button located on the switch.

2Open the LCD monitor fully, or pull out the viewfinder fully.

3 Press MENU. The Menu Screen appears.

4 Press + or – to select “n”,

and press SELECT/SET. The CAMERA DISPLAY Menu appears.

5 Press + or – to select

“CLOCK ADJ.”, and press RETURN

SELECT/SET. The

parameter for “Month” is highlighted.

6	Press + or – to input the
		CAMERA DISPLAY
	month, and press SELECT/
	SET. Repeat to input the	CLOCK	DEC 2	5'0 3
	day, year, hour and	ADJ .	5 : 3	0 PM
7	minute.
	Press + or – to select	RETURN

“BRETURN”, and press

SELECT/SET twice. The Menu Screen closes.

Built-in Clock’s Rechargeable Lithium Battery

To store the date/time in memory, the clock’s rechargeable lithium battery is integrated in the camcorder. While the camcorder is connected to an AC outlet using the AC Adapter, or while the battery pack attached to the camcorder continues to supply power, the clock’s rechargeable lithium battery is always charged. However, if the camcorder is not used for approx. 3 months, the clock’s lithium battery will become discharged and the date/time stored in memory will be lost. When this occurs, first connect the camcorder to an AC outlet using the AC Adapter for over 24 hours to charge the clock’s rechargeable lithium battery. Then perform the date/ time setting before using the camcorder.

Note that the camcorder can be used without setting the date/time.

NOTE:

Even if you select “CLOCK ADJ.”, if the parameter is not highlighted, the camcorder’s internal clock continues to operate. Once you move the highlight bar to the first date/time parameter (month), the clock stops. When you finish setting the minute and press the MENU, the date and time begin operation from the date and time you have just set.