![](/images/new-backgrounds/1292302/29230293x1.webp)
![](/images/new-backgrounds/1292302/29230293xi2.webp)
Backlight Compensation
Backlight compensation brightens the subject quickly.
Press BACK LIGHT. The indicator is displayed
and the subject is brightened. If pressed again, disappears and the brightness returns to the previous level.
●Using the BACK LIGHT Button may cause the light around the subject to become too bright and the subject to become white.
●Backlight compensations is also available when the Power Switch is set to “A”.
![](/images/new-backgrounds/1292302/29230293xi6.webp)
White Balance Adjustment
The white balance that refers to the correctness of color reproduction under various lighting. If the white balance is correct, all other colors will be accurately reproduced.
The white balance is usually adjusted automatically. However, more advanced camcorder operators control this function manually to achieve a more professional color/tint reproduction.
AUTO: White balance is adjusted automatically.
MWB: Adjust the white balance manually when shooting under various types of lighting. ( “Manual White Balance Adjustment”)
FINE: Outdoors on a sunny day.
CLOUD: Outdoors on a cloudy day.
HALOGEN: A video light or similar type of lighting is used.
●For the setting, refer to “Changing The Menu Settings” ( pg. 31).
●The selected mode indicator except “AUTO” appears.
To return to automatic white balance…
Set “u” to “AUTO”. ( pg. 31, 34) Or, set the Power Switch to “A”.
NOTE:
White balance cannot be used when “r” is set to “SEPIA” or “MONOTONE”. ( pg. 34)
EN"%
![](/images/new-backgrounds/1292302/29230293xi10.webp)
Manual White Balance Adjustment
Adjust the white balance manually when shooting under various types of lighting.
White paper
1 | Set the Power Switch to “M” while pressing down |
| ||||
2 | the Lock Button located on the switch. |
|
| |||
Open the LCD monitor fully, or pull out the |
|
| ||||
3 | viewfinder fully. |
|
|
|
| |
Set “u” to “MWB”. ( pg. 31, 34) |
|
| FEATURES | |||
| subject. Adjust zoom or position yourself so that | |||||
4 | ● The | indication blinks slowly. |
|
|
| |
Remove the lens cap. |
|
|
|
| ||
5 | Hold a sheet of plain white paper in front of the |
| ||||
6 | the white paper fills the screen. |
|
| ADVANCED | ||
Press SELECT/SET until | begins blinking |
| ||||
|
| |||||
| rapidly. |
|
|
|
|
|
| When the setting is completed, | resumes |
|
| ||
7 | normal blinking. |
|
|
|
| |
Press SELECT/SET twice. The Menu Screen closes |
| |||||
| and the Manual White Balance indicator | is |
| |||
| displayed. |
|
|
|
|
|
NOTES:
●In step 5, it may be difficult to focus on the white paper. In such a case, adjust focus manually.
( pg. 45)
●A subject can be shot under various types of lighting conditions indoors (natural, fluorescent, candlelight, etc.). Because the color temperature is different depending on the light source, the subject tint will differ depending on the white balance settings. Use this function for a more natural result.
●Once you adjust white balance manually, the setting is retained even if the power is turned off or the battery removed.