JVC GR-D200 manual Wipe Or Fader Effects, Wipe/Fader, To deactivate the selected effect…

! ￿EN MENUS FOR DETAILED ADJUSTMENT (cont.)

4)Press SELECT/SET. The Menu Screen returns.

●Repeat the procedure if you wish to set other function menus.

5)Press SELECT/SET again. The Menu Screen closes.

NOTES:

●The “m“ settings are effective when the Power Switch is set to both “A” and “M”. However, the menu settings can be changed only when the Power Switch is set to “M”.

●The “q” settings are effective only when the Power Switch is set to “M”.

●The “s” functions which are set when the Power Switch is set to “M” are also applied when the Power Switch is set to “PLAY”.

●The “n” (CAMERA DISPLAY) settings are effective even when the Power Switch is set to “A”. However, the menu settings can be changed only when the Power Switch is set to “M”.

●The “n” (CAMERA DISPLAY) settings are effective only for shooting.

●The “n” (VIDEO DISPLAY) settings are effective only for video playback.

●The date indication can also be turned on/off by pressing the DISPLAY Button on the remote control (provided). ( pg. 22, 52, 62)

RECORDING MENUS

Wipe Or Fader Effects

IMPORTANT:

Some Wipe/Fader Effects cannot be used with certain modes of Program AE with special effects. ( pg. 33) If an unusable Wipe/Fader Effect is selected, its indicator blinks in blue or goes out.

These effects let you make pro-style scene transitions. Use them to spice up the transition from one scene to the next.

Wipe or Fader works when video recording is started or stopped.

1Set the VIDEO/MEMORY Switch to “VIDEO”.

2Set the Power Switch to “M” while pressing down the Lock Button located on the switch.

3Open the LCD monitor fully, or pull out the viewfinder fully.

4Set “v” to the desired mode. ( pg. 31) ● The selected effect indicator appears.

5Press the Recording Start/Stop Button to activate the Fade-in/out or Wipe-in/out.

To deactivate the selected effect…

Select “OFF” in step 4.

NOTES:

●You can select other effects for “WIPE/FADER” during recording.

●You can extend the length of a Wipe or Fader by pressing and holding the Recording Start/Stop Button.

WIPE/FADER

(Factory-preset: OFF)

OFF: Disables effects.

FADER–WHITE: Fade in or out with a white screen.

FADER–BLACK: Fade in or out with a black screen.

FADER–B.W: Fade in to a color screen from a black and white screen, or fade out from color to black and white.